思享工具箱

二进制部署K8S-2集群部署

摘要：
串行10800；重试（15分钟）604800；过期（1周）86400；最少（1天））NSdns.host.com.$TTL60；串行10800；
二进制部署K8S-2集群部署

感谢老男孩教育王导的公开视频，文档整理自https://www.yuque.com/duduniao/k8s。

因为在后期运行容器需要有大量的物理硬件资源使用的环境是用的Wmware EXSI如果使用笔记本可适当调整虚拟机配置。

角色主机名IPCPUMemOS
(主)负载均衡、内网DNShdss7-11.host.com10.4.7.114C4GCentOS Linux release 7.8
(备)负载均衡、内网DNShdss7-12.host.com10.4.7.124C4GCentOS Linux release 7.8
k8s master、k8s node、etcdhdss7-21.host.com10.4.7.214C8GCentOS Linux release 7.8
k8s master、k8s node、etcdhdss7-22.host.com10.4.7.224C8GCentOS Linux release 7.8
harbor私有仓库、nfshdss7-200.host.com10.4.7.2004C4GCentOS Linux release 7.8

2. 安装前准备

2.1. 环境准备

所有机器都需要执行

[root@hdss7-11 ~]# systemctl stop firewalld
[root@hdss7-11 ~]# systemctl disable firewalld
[root@hdss7-11 ~]# setenforce 0
[root@hdss7-11 ~]# sed -ir '/^SELINUX=/s/=.+/=disabled/' /etc/selinux/config

[root@hdss7-11 ~]# yum install -y epel-release
[root@hdss7-11 ~]# yum install -y wget net-tools telnet tree nmap sysstat lrzsz dos2unix bind-utils vim less ntpdate

# 所有机器时间同步，生产环境需要有时间同步服务器。
ntpdate ntp1.aliyun.com

2.2. bind安装

2.2.1. hdss7-11 安装bind

[root@hdss7-11 ~]# yum install -y bind

2.2.2. hdss7-11 配置bind

  • 主配置文件
[root@hdss7-11 ~]# vim /etc/named.conf  # 确保以下配置正确
  listen-on port 53 { 10.4.7.11; };
    directory   "/var/named";
    allow-query     { any; };
  forwarders      { 10.4.7.254; };      # 上级DNS，需要手动添加
  recursion yes;
  dnssec-enable no;
  dnssec-validation no;
  • 在 hdss7-11.host.com 配置区域文件
# 增加两个zone配置，od.com为业务域，host.com.zone为主机域

[root@hdss7-11 ~]# cat>>/etc/named.rfc1912.zones<<EOF  
zone "host.com" IN {
        type  master;
        file  "host.com.zone";
        allow-update { 10.4.7.11; };
};

zone "od.com" IN {
        type  master;
        file  "od.com.zone";
        allow-update { 10.4.7.11; };
};
EOF
  • 在 hdss7-11.host.com 配置主机域文件
# line6中时间需要修改
[root@hdss7-11 ~]# vim /var/named/host.com.zone
$ORIGIN host.com.
$TTL 600    ; 10 minutes
@       IN SOA  dns.host.com. dnsadmin.host.com. (
                2021043001 ; serial
                10800      ; refresh (3 hours)
                900        ; retry (15 minutes)
                604800     ; expire (1 week)
                86400      ; minimum (1 day)
                )
            NS   dns.host.com.
$TTL 60 ; 1 minute
dns                A    10.4.7.11
HDSS7-11           A    10.4.7.11
HDSS7-12           A    10.4.7.12
HDSS7-21           A    10.4.7.21
HDSS7-22           A    10.4.7.22
HDSS7-200          A    10.4.7.200
  • 在 hdss7-11.host.com 配置业务域文件
[root@hdss7-11 ~]# vim /var/named/od.com.zone
$ORIGIN od.com.
$TTL 600    ; 10 minutes
@           IN SOA  dns.od.com. dnsadmin.od.com. (
                2021043001 ; serial
                10800      ; refresh (3 hours)
                900        ; retry (15 minutes)
                604800     ; expire (1 week)
                86400      ; minimum (1 day)
                )
                NS   dns.od.com.
$TTL 60 ; 1 minute
dns                A    10.4.7.11
  • 在 hdss7-11.host.com 启动bind服务，并测试
[root@hdss7-11 ~]# named-checkconf  # 检查配置文件
[root@hdss7-11 ~]# systemctl start named ; systemctl enable named
[root@hdss7-11 ~]# host HDSS7-200 10.4.7.11
Using domain server:
Name: 10.4.7.11
Address: 10.4.7.11#53
Aliases: 

HDSS7-200.host.com has address 10.4.7.200

2.2.3. 修改宿主机DNS

  • 修改所有主机的dns服务器地址
[root@hdss7-11 ~]# sed -i '/DNS1/s/10.4.7.254/10.4.7.11/' /etc/sysconfig/network-scripts/ifcfg-ens32
[root@hdss7-11 ~]# systemctl restart network
[root@hdss7-11 ~]# cat /etc/resolv.conf
# Generated by NetworkManager
search host.com
nameserver 10.4.7.11
  • 这里的客户机是windows，直接更改的hosts

二进制部署K8S-2集群部署第1张

10.4.7.11              HDSS7-11.host.com
10.4.7.12              HDSS7-12.host.com
10.4.7.21              HDSS7-21.host.com
10.4.7.22              HDSS7-22.host.com
10.4.7.200             HDSS7-200.host.com harbor.od.com k8s-yaml.od.com wlw.od.com
10.4.7.10              traefik.od.com dashboard.od.com jenkins.od.com dubbo-monitor.od.com demo.od.com

二进制部署K8S-2集群部署第2张

2.3. 根证书准备

  • 在 hdss7-200 下载工具
[root@hdss7-200 ~]# wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64 -O /usr/local/bin/cfssl
[root@hdss7-200 ~]# wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64 -O /usr/local/bin/cfssl-json
[root@hdss7-200 ~]# wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64 -O /usr/local/bin/cfssl-certinfo
[root@hdss7-200 ~]# chmod u+x /usr/local/bin/cfssl*
  • 在 hdss7-200 签发根证书
[root@hdss7-200 ~]# mkdir /opt/certs/ ; cd /opt/certs/
# 根证书配置：
# CN 一般写域名，浏览器会校验
# names 为地区和公司信息
# expiry 为过期时间
[root@hdss7-200 certs]# cat>>/opt/certs/ca-csr.json<<EOF
{
    "CN": "OldboyEdu",
    "hosts": [
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "beijing",
            "L": "beijing",
            "O": "od",
            "OU": "ops"
        }
    ],
    "ca": {
        "expiry": "175200h"
    }
}
EOF

[root@hdss7-200 certs]# cfssl gencert -initca ca-csr.json | cfssl-json -bare ca
2020/01/05 10:42:07 [INFO] generating a new CA key and certificate from CSR
2020/01/05 10:42:07 [INFO] generate received request
2020/01/05 10:42:07 [INFO] received CSR
2020/01/05 10:42:07 [INFO] generating key: rsa-2048
2020/01/05 10:42:08 [INFO] encoded CSR
2020/01/05 10:42:08 [INFO] signed certificate with serial number 451005524427475354617025362003367427117323539780

[root@hdss7-200 certs]# ls -l ca*
-rw-r--r-- 1 root root  993 Jan  5 10:42 ca.csr
-rw-r--r-- 1 root root  328 Jan  5 10:39 ca-csr.json
-rw------- 1 root root 1675 Jan  5 10:42 ca-key.pem
-rw-r--r-- 1 root root 1346 Jan  5 10:42 ca.pem

2.4. docker环境准备

需要安装docker的机器：hdss7-21 hdss7-22 hdss7-200，以hdss7-21为例

[root@hdss7-21 ~]# wget -O /etc/yum.repos.d/docker-ce.repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
[root@hdss7-21 ~]# yum install -y docker-ce

# 不安全的registry中增加了harbor地址
# 各个机器上bip网段不一致，bip中间两段与宿主机最后两段相同，目的是方便定位问题 
[root@hdss7-21 ~]# mkdir /etc/docker/
[root@hdss7-21 ~]# vim /etc/docker/daemon.json
{
  "graph": "/data/docker",
  "storage-driver": "overlay2",
  "insecure-registries": ["registry.access.redhat.com","quay.io","harbor.od.com"],
  "registry-mirrors": ["https://registry.docker-cn.com"],
  "bip": "172.7.21.1/24",
  "exec-opts": ["native.cgroupdriver=systemd"],
  "live-restore": true
}
[root@hdss7-21 ~]# mkdir /data/docker
[root@hdss7-21 ~]# systemctl start docker ; systemctl enable docker

2.5. harbor安装

参考地址：https://www.yuque.com/duduniao/trp3ic/ohrxds#9Zpxx

官方地址：https://goharbor.io/

下载地址：https://github.com/goharbor/harbor/releases

2.5.1. hdss7-200 安装harbor

# 目录说明：
# /opt/src : 源码、文件下载目录
# /opt/release : 各个版本软件存放位置
# /opt/apps : 各个软件当前版本的软链接
[root@hdss7-200 ~]# mkdir /opt/{src,apps,release}
[root@hdss7-200 ~]# cd /opt/src
[root@hdss7-200 src]# wget https://github.com/goharbor/harbor/releases/download/v1.9.4/harbor-offline-installer-v1.9.4.tgz
[root@hdss7-200 src]# tar -xvf harbor-offline-installer-v1.9.4.tgz
[root@hdss7-200 src]# mv harbor /opt/release/harbor-v1.9.4
[root@hdss7-200 src]# ln -s /opt/release/harbor-v1.9.4 /opt/apps/harbor
[root@hdss7-200 src]# ll /opt/apps/
total 0
lrwxrwxrwx 1 root root 26 Jan  5 11:13 harbor -> /opt/release/harbor-v1.9.4

# 实验环境仅修改以下配置项，生产环境还得修改密码
[root@hdss7-200 src]# vim /opt/apps/harbor/harbor.yml
hostname: harbor.od.com
http:
  port: 180
data_volume: /data/harbor
location: /data/harbor/logs
[root@hdss7-200 src]# yum install -y docker-compose
[root@hdss7-200 src]# cd /opt/apps/harbor/
[root@hdss7-200 harbor]# ./install.sh 
......
✔ ----Harbor has been installed and started successfully.----
[root@hdss7-200 harbor]# docker-compose ps 
      Name                     Command               State             Ports          
--------------------------------------------------------------------------------------
harbor-core         /harbor/harbor_core              Up                               
harbor-db           /docker-entrypoint.sh            Up      5432/tcp                 
harbor-jobservice   /harbor/harbor_jobservice  ...   Up                               
harbor-log          /bin/sh -c /usr/local/bin/ ...   Up      127.0.0.1:1514->10514/tcp
harbor-portal       nginx -g daemon off;             Up      8080/tcp                 
nginx               nginx -g daemon off;             Up      0.0.0.0:180->8080/tcp    
redis               redis-server /etc/redis.conf     Up      6379/tcp                 
registry            /entrypoint.sh /etc/regist ...   Up      5000/tcp                 
registryctl         /harbor/start.sh                 Up
  • 设置harbor开机启动
 # 增加以下内容
[root@hdss7-200 harbor]# cat>>/etc/rc.d/rc.local<<EOF 
# start harbor
cd /opt/apps/harbor
/usr/bin/docker-compose stop
/usr/bin/docker-compose start
EOF

# 注意要给执行权限
chmod +x /etc/rc.d/rc.local

2.5.2. hdss7-200 安装nginx

  • 安装Nginx反向代理harbor
# 当前机器中Nginx功能较少，使用yum安装即可。如有多个harbor考虑源码编译且配置健康检查
# nginx配置此处忽略，仅仅使用最简单的配置。
[root@hdss7-200 ~]# yum -y install nginx

[root@hdss7-200 harbor]# cat>>/etc/nginx/conf.d/harbor.conf<<EOF
server {
    listen       80;
    server_name  harbor.od.com;
    # 避免出现上传失败的情况
    client_max_body_size 1000m;

    location / {
        proxy_pass http://127.0.0.1:180;
    }
}
EOF

[root@hdss7-200 harbor]# systemctl start nginx ; systemctl enable nginx
  • hdss7-11 配置DNS解析
# serial序列号需要滚动一个,根据日期编写的。只是一个数字而已
[root@hdss7-11 ~]# vim /var/named/od.com.zone 
$ORIGIN od.com.
$TTL 600    ; 10 minutes
@           IN SOA  dns.od.com. dnsadmin.od.com. (
                2021043002 ; serial    # 更改这个数字
                10800      ; refresh (3 hours)
                900        ; retry (15 minutes)
                604800     ; expire (1 week)
                86400      ; minimum (1 day)
                )
                NS   dns.od.com.
$TTL 60 ; 1 minute
dns                A    10.4.7.11
harbor             A    10.4.7.200
[root@hdss7-11 ~]# systemctl restart named.service  # reload 无法使得配置生效
[root@hdss7-11 ~]# host harbor.od.com
harbor.od.com has address 10.4.7.200

二进制部署K8S-2集群部署第3张

  • 新建项目: public

二进制部署K8S-2集群部署第4张

  • 测试harbor
[root@hdss7-200 ~]# docker pull nginx:1.17.9
[root@hdss7-200 ~]# docker tag nginx:1.17.9 harbor.od.com/public/nginx:v1.17.9
[root@hdss7-200 ~]# docker login -u admin harbor.od.com
                    # 默认密码: Harbor12345
[root@hdss7-200 ~]# docker image push harbor.od.com/public/nginx:v1.17.9

二进制部署K8S-2集群部署第5张

3. 主控节点安装

3.1. etcd安装

etcd 的leader选举机制，要求至少为3台或以上的奇数台。本次安装涉及：hdss7-12，hdss7-21，hdss7-22

3.1.1. 签发etcd证书

证书签发服务器 hdss7-200:

  • 创建ca的json配置: /opt/certs/ca-config.json

    • server 表示服务端连接客户端时携带的证书，用于客户端验证服务端身份
    • client 表示客户端连接服务端时携带的证书，用于服务端验证客户端身份
    • peer 表示相互之间连接时使用的证书，如etcd节点之间验证
cat>>/opt/certs/ca-config.json<<EOF
{
    "signing": {
        "default": {
            "expiry": "175200h"
        },
        "profiles": {
            "server": {
                "expiry": "175200h",
                "usages": [
                    "signing",
                    "key encipherment",
                    "server auth"
                ]
            },
            "client": {
                "expiry": "175200h",
                "usages": [
                    "signing",
                    "key encipherment",
                    "client auth"
                ]
            },
            "peer": {
                "expiry": "175200h",
                "usages": [
                    "signing",
                    "key encipherment",
                    "server auth",
                    "client auth"
                ]
            }
        }
    }
}
EOF
  • 创建etcd证书配置：/opt/certs/etcd-peer-csr.json

重点在hosts上，将所有可能的etcd服务器添加到host列表，不能使用网段，新增etcd服务器需要重新签发证书

cat>>/opt/certs/etcd-peer-csr.json<<EOF
{
    "CN": "k8s-etcd",
    "hosts": [
        "10.4.7.11",
        "10.4.7.12",
        "10.4.7.21",
        "10.4.7.22"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "beijing",
            "L": "beijing",
            "O": "od",
            "OU": "ops"
        }
    ]
}
EOF
  • 签发证书
[root@hdss7-200 ~]# cd /opt/certs/
[root@hdss7-200 certs]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=peer etcd-peer-csr.json |cfssl-json -bare etcd-peer
[root@hdss7-200 certs]# ll etcd-peer*
-rw-r--r-- 1 root root 1062 Jan  5 17:01 etcd-peer.csr
-rw-r--r-- 1 root root  363 Jan  5 16:59 etcd-peer-csr.json
-rw------- 1 root root 1675 Jan  5 17:01 etcd-peer-key.pem
-rw-r--r-- 1 root root 1428 Jan  5 17:01 etcd-peer.pem

3.1.2. 安装etcd

etcd地址：https://github.com/etcd-io/etcd/

实验使用版本: etcd-v3.1.20-linux-amd64.tar.gz

本次安装涉及：hdss7-12，hdss7-21，hdss7-22

  • 下载etcd
[root@hdss7-12 ~]# useradd -s /sbin/nologin -M etcd
[root@hdss7-12 ~]# cd /opt/src/
[root@hdss7-12 src]# wget https://github.com/etcd-io/etcd/releases/download/v3.1.20/etcd-v3.1.20-linux-amd64.tar.gz
[root@hdss7-12 src]# tar -xf etcd-v3.1.20-linux-amd64.tar.gz 
[root@hdss7-12 src]# mv etcd-v3.1.20-linux-amd64 /opt/release/etcd-v3.1.20
[root@hdss7-12 src]# ln -s /opt/release/etcd-v3.1.20 /opt/apps/etcd
[root@hdss7-12 src]# ll /opt/apps/etcd
lrwxrwxrwx 1 root root 25 Jan  5 17:56 /opt/apps/etcd -> /opt/release/etcd-v3.1.20
[root@hdss7-12 src]# mkdir -p /opt/apps/etcd/certs /data/etcd /data/logs/etcd-server
  • 下发证书到各个etcd上
[root@hdss7-200 ~]# cd /opt/certs/
[root@hdss7-200 certs]# for i in 12 21 22;do scp ca.pem etcd-peer.pem etcd-peer-key.pem hdss7-${i}:/opt/apps/etcd/certs/ ;done

[root@hdss7-12 src]# md5sum /opt/apps/etcd/certs/*
8778d0c3411891af61a287e49a70c89a  /opt/apps/etcd/certs/ca.pem
7918783c2f6bf69e96edf03e67d04983  /opt/apps/etcd/certs/etcd-peer-key.pem
d4d849751a834c7727d42324fdedf92d  /opt/apps/etcd/certs/etcd-peer.pem
  • 创建启动脚本(部分参数每台机器不同)
[root@hdss7-12 ~]# vim /opt/apps/etcd/etcd-server-startup.sh
#!/bin/sh
# listen-peer-urls etcd节点之间通信端口
# listen-client-urls 客户端与etcd通信端口
# quota-backend-bytes 配额大小
# 需要修改的参数：name,listen-peer-urls,listen-client-urls,initial-advertise-peer-urls

WORK_DIR=$(dirname $(readlink -f $0))
[ $? -eq 0 ] && cd $WORK_DIR || exit

/opt/apps/etcd/etcd --name etcd-server-7-12 
    --data-dir /data/etcd/etcd-server 
    --listen-peer-urls https://10.4.7.12:2380 
    --listen-client-urls https://10.4.7.12:2379,http://127.0.0.1:2379 
    --quota-backend-bytes 8000000000 
    --initial-advertise-peer-urls https://10.4.7.12:2380 
    --advertise-client-urls https://10.4.7.12:2379,http://127.0.0.1:2379 
    --initial-cluster  etcd-server-7-12=https://10.4.7.12:2380,etcd-server-7-21=https://10.4.7.21:2380,etcd-server-7-22=https://10.4.7.22:2380 
    --ca-file ./certs/ca.pem 
    --cert-file ./certs/etcd-peer.pem 
    --key-file ./certs/etcd-peer-key.pem 
    --client-cert-auth  
    --trusted-ca-file ./certs/ca.pem 
    --peer-ca-file ./certs/ca.pem 
    --peer-cert-file ./certs/etcd-peer.pem 
    --peer-key-file ./certs/etcd-peer-key.pem 
    --peer-client-cert-auth 
    --peer-trusted-ca-file ./certs/ca.pem 
    --log-output stdout

[root@hdss7-12 ~]# chmod u+x /opt/apps/etcd/etcd-server-startup.sh
[root@hdss7-12 ~]# chown -R etcd.etcd /opt/apps/etcd/ /data/etcd /data/logs/etcd-server

3.1.3. 启动etcd

因为这些进程都是要启动为后台进程，要么手动启动，要么采用后台进程管理工具，实验中使用后台管理工具

[root@hdss7-12 ~]# yum install -y supervisor
[root@hdss7-12 ~]# systemctl start supervisord ; systemctl enable supervisord
[root@hdss7-12 ~]# vim /etc/supervisord.d/etcd-server.ini
[program:etcd-server-7-12]
command=/opt/apps/etcd/etcd-server-startup.sh         
numprocs=1                                            
directory=/opt/apps/etcd                              
autostart=true                                        
autorestart=true                                      
startsecs=30                                         
startretries=3                                        
exitcodes=0,2                                         
stopsignal=QUIT                                       
stopwaitsecs=10                                      
user=etcd                                            
redirect_stderr=true                                 
stdout_logfile=/data/logs/etcd-server/etcd.stdout.log 
stdout_logfile_maxbytes=64MB                          
stdout_logfile_backups=5                             
stdout_capture_maxbytes=1MB                           
stdout_events_enabled=false   
killasgroup=true
stopasgroup=true

[root@hdss7-12 ~]# mkdir /data/logs/etcd-server/ -p

[root@hdss7-12 ~]# supervisorctl update
etcd-server-7-12: added process group
  • etcd 进程状态查看
[root@hdss7-12 ~]# supervisorctl status  # supervisorctl 状态
etcd-server-7-12                 RUNNING   pid 22375, uptime 0:00:39

[root@hdss7-12 ~]# netstat -lntp|grep etcd
tcp        0      0 10.4.7.12:2379          0.0.0.0:*               LISTEN      22379/etcd          
tcp        0      0 127.0.0.1:2379          0.0.0.0:*               LISTEN      22379/etcd          
tcp        0      0 10.4.7.12:2380          0.0.0.0:*               LISTEN      22379/etcd

[root@hdss7-12 ~]# /opt/apps/etcd/etcdctl member list # 随着etcd重启，leader会变化
988139385f78284: name=etcd-server-7-22 peerURLs=https://10.4.7.22:2380 clientURLs=http://127.0.0.1:2379,https://10.4.7.22:2379 isLeader=false
5a0ef2a004fc4349: name=etcd-server-7-21 peerURLs=https://10.4.7.21:2380 clientURLs=http://127.0.0.1:2379,https://10.4.7.21:2379 isLeader=true
f4a0cb0a765574a8: name=etcd-server-7-12 peerURLs=https://10.4.7.12:2380 clientURLs=http://127.0.0.1:2379,https://10.4.7.12:2379 isLeader=false

[root@hdss7-22 /opt/apps/etcd]# ./etcdctl cluster-health
member 988139385f78284 is healthy: got healthy result from http://127.0.0.1:2379
member 5a0ef2a004fc4349 is healthy: got healthy result from http://127.0.0.1:2379
member f4a0cb0a765574a8 is healthy: got healthy result from http://127.0.0.1:2379
cluster is healthy
  • etcd 启停方式
[root@hdss7-12 ~]# supervisorctl start etcd-server-7-12
[root@hdss7-12 ~]# supervisorctl stop etcd-server-7-12
[root@hdss7-12 ~]# supervisorctl restart etcd-server-7-12
[root@hdss7-12 ~]# supervisorctl status etcd-server-7-12

3.2. apiserver 安装

3.2.1. 下载kubernetes服务端

aipserver 涉及的服务器：hdss7-21，hdss7-22

下载 kubernetes 二进制版本包需要FQ工具

[root@hdss7-21 ~]# cd /opt/src
[root@hdss7-21 src]# wget https://dl.k8s.io/v1.15.2/kubernetes-server-linux-amd64.tar.gz

[root@hdss7-21 src]# tar -xf kubernetes-server-linux-amd64.tar.gz 
[root@hdss7-21 src]# mv kubernetes /opt/release/kubernetes-v1.15.2
[root@hdss7-21 src]# ln -s /opt/release/kubernetes-v1.15.2 /opt/apps/kubernetes
[root@hdss7-21 src]# ll /opt/apps/kubernetes
lrwxrwxrwx 1 root root 31 Jan  6 12:59 /opt/apps/kubernetes -> /opt/release/kubernetes-v1.15.2

[root@hdss7-21 src]# cd /opt/apps/kubernetes
[root@hdss7-21 kubernetes]# rm -f kubernetes-src.tar.gz 
[root@hdss7-21 kubernetes]# cd server/bin/
[root@hdss7-21 bin]# rm -f *.tar *_tag  # *.tar *_tag 镜像文件
[root@hdss7-21 bin]# ll
total 884636
-rwxr-xr-x 1 root root  43534816 Aug  5 18:01 apiextensions-apiserver
-rwxr-xr-x 1 root root 100548640 Aug  5 18:01 cloud-controller-manager
-rwxr-xr-x 1 root root 200648416 Aug  5 18:01 hyperkube
-rwxr-xr-x 1 root root  40182208 Aug  5 18:01 kubeadm
-rwxr-xr-x 1 root root 164501920 Aug  5 18:01 kube-apiserver
-rwxr-xr-x 1 root root 116397088 Aug  5 18:01 kube-controller-manager
-rwxr-xr-x 1 root root  42985504 Aug  5 18:01 kubectl
-rwxr-xr-x 1 root root 119616640 Aug  5 18:01 kubelet
-rwxr-xr-x 1 root root  36987488 Aug  5 18:01 kube-proxy
-rwxr-xr-x 1 root root  38786144 Aug  5 18:01 kube-scheduler
-rwxr-xr-x 1 root root   1648224 Aug  5 18:01 mounter

3.2.2. 签发证书

签发证书 涉及的服务器：hdss7-200

  • 签发client证书（apiserver和etcd通信证书）
[root@hdss7-200 ~]# cd /opt/certs/
[root@hdss7-200 certs]# cat>>/opt/certs/client-csr.json<<EOF
{
    "CN": "k8s-node",
    "hosts": [
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "beijing",
            "L": "beijing",
            "O": "od",
            "OU": "ops"
        }
    ]
}
EOF

[root@hdss7-200 certs]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=client client-csr.json |cfssl-json -bare client
2020/01/06 13:42:47 [INFO] generate received request
2020/01/06 13:42:47 [INFO] received CSR
2020/01/06 13:42:47 [INFO] generating key: rsa-2048
2020/01/06 13:42:47 [INFO] encoded CSR
2020/01/06 13:42:47 [INFO] signed certificate with serial number 268276380983442021656020268926931973684313260543
2020/01/06 13:42:47 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").

[root@hdss7-200 certs]# ls client* -l
-rw-r--r-- 1 root root  993 Jan  6 13:42 client.csr
-rw-r--r-- 1 root root  280 Jan  6 13:42 client-csr.json
-rw------- 1 root root 1679 Jan  6 13:42 client-key.pem
-rw-r--r-- 1 root root 1363 Jan  6 13:42 client.pem
  • 签发server证书（apiserver和其它k8s组件通信使用）
# hosts中将所有可能作为apiserver的ip添加进去，VIP 10.4.7.10 也要加入
[root@hdss7-200 certs]# cat>>/opt/certs/apiserver-csr.json<<EOF
{
    "CN": "k8s-apiserver",
    "hosts": [
        "127.0.0.1",
        "192.168.0.1",
        "kubernetes.default",
        "kubernetes.default.svc",
        "kubernetes.default.svc.cluster",
        "kubernetes.default.svc.cluster.local",
        "10.4.7.10",
        "10.4.7.21",
        "10.4.7.22",
        "10.4.7.23"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "beijing",
            "L": "beijing",
            "O": "od",
            "OU": "ops"
        }
    ]
}
EOF

[root@hdss7-200 certs]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=server apiserver-csr.json |cfssl-json -bare apiserver
2020/01/06 13:46:56 [INFO] generate received request
2020/01/06 13:46:56 [INFO] received CSR
2020/01/06 13:46:56 [INFO] generating key: rsa-2048
2020/01/06 13:46:56 [INFO] encoded CSR
2020/01/06 13:46:56 [INFO] signed certificate with serial number 573076691386375893093727554861295529219004473872
2020/01/06 13:46:56 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").

[root@hdss7-200 certs]# ls apiserver* -l
-rw-r--r-- 1 root root 1249 Jan  6 13:46 apiserver.csr
-rw-r--r-- 1 root root  566 Jan  6 13:45 apiserver-csr.json
-rw------- 1 root root 1675 Jan  6 13:46 apiserver-key.pem
-rw-r--r-- 1 root root 1598 Jan  6 13:46 apiserver.pem
  • 证书下发
[root@hdss7-200 certs]# for i in 21 22;do echo hdss7-$i;ssh hdss7-$i "mkdir /opt/apps/kubernetes/server/bin/certs";scp apiserver-key.pem apiserver.pem ca-key.pem ca.pem client-key.pem client.pem hdss7-$i:/opt/apps/kubernetes/server/bin/certs/;done

3.2.3. 配置apiserver日志审计

aipserver 涉及的服务器：hdss7-21，hdss7-22

[root@hdss7-21 bin]# mkdir /opt/apps/kubernetes/conf

# 打开文件后，设置 :set paste，避免自动缩进
[root@hdss7-21 bin]# vi /opt/apps/kubernetes/conf/audit.yaml
apiVersion: audit.k8s.io/v1beta1 # This is required.
kind: Policy
# Don't generate audit events for all requests in RequestReceived stage.
omitStages:
  - "RequestReceived"
rules:
  # Log pod changes at RequestResponse level
  - level: RequestResponse
    resources:
    - group: ""
      # Resource "pods" doesn't match requests to any subresource of pods,
      # which is consistent with the RBAC policy.
      resources: ["pods"]
  # Log "pods/log", "pods/status" at Metadata level
  - level: Metadata
    resources:
    - group: ""
      resources: ["pods/log", "pods/status"]

  # Don't log requests to a configmap called "controller-leader"
  - level: None
    resources:
    - group: ""
      resources: ["configmaps"]
      resourceNames: ["controller-leader"]

  # Don't log watch requests by the "system:kube-proxy" on endpoints or services
  - level: None
    users: ["system:kube-proxy"]
    verbs: ["watch"]
    resources:
    - group: "" # core API group
      resources: ["endpoints", "services"]

  # Don't log authenticated requests to certain non-resource URL paths.
  - level: None
    userGroups: ["system:authenticated"]
    nonResourceURLs:
    - "/api*" # Wildcard matching.
    - "/version"

  # Log the request body of configmap changes in kube-system.
  - level: Request
    resources:
    - group: "" # core API group
      resources: ["configmaps"]
    # This rule only applies to resources in the "kube-system" namespace.
    # The empty string "" can be used to select non-namespaced resources.
    namespaces: ["kube-system"]

  # Log configmap and secret changes in all other namespaces at the Metadata level.
  - level: Metadata
    resources:
    - group: "" # core API group
      resources: ["secrets", "configmaps"]

  # Log all other resources in core and extensions at the Request level.
  - level: Request
    resources:
    - group: "" # core API group
    - group: "extensions" # Version of group should NOT be included.

  # A catch-all rule to log all other requests at the Metadata level.
  - level: Metadata
    # Long-running requests like watches that fall under this rule will not
    # generate an audit event in RequestReceived.
    omitStages:
      - "RequestReceived"

3.2.4. 配置启动脚本

aipserver 涉及的服务器：hdss7-21，hdss7-22

  • 创建启动脚本
[root@hdss7-21 bin]# vim /opt/apps/kubernetes/server/bin/kube-apiserver-startup.sh
#!/bin/bash

WORK_DIR=$(dirname $(readlink -f $0))
[ $? -eq 0 ] && cd $WORK_DIR || exit

/opt/apps/kubernetes/server/bin/kube-apiserver 
    --apiserver-count 2 
    --audit-log-path /data/logs/kubernetes/kube-apiserver/audit-log 
    --audit-policy-file ../../conf/audit.yaml 
    --authorization-mode RBAC 
    --client-ca-file ./certs/ca.pem 
    --requestheader-client-ca-file ./certs/ca.pem 
    --enable-admission-plugins NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota 
    --etcd-cafile ./certs/ca.pem 
    --etcd-certfile ./certs/client.pem 
    --etcd-keyfile ./certs/client-key.pem 
    --etcd-servers https://10.4.7.12:2379,https://10.4.7.21:2379,https://10.4.7.22:2379 
    --service-account-key-file ./certs/ca-key.pem 
    --service-cluster-ip-range 192.168.0.0/16 
    --service-node-port-range 3000-29999 
    --target-ram-mb=1024 
    --kubelet-client-certificate ./certs/client.pem 
    --kubelet-client-key ./certs/client-key.pem 
    --log-dir  /data/logs/kubernetes/kube-apiserver 
    --tls-cert-file ./certs/apiserver.pem 
    --tls-private-key-file ./certs/apiserver-key.pem 
    --v 2
    
    # 添加可执行权限
    chmod +x /opt/release/kubernetes-v1.15.2/server/bin/kube-apiserver-startup.sh
  • 配置supervisor启动配置
[root@hdss7-21 bin]# vim /etc/supervisord.d/kube-apiserver.ini
[program:kube-apiserver-7-21]
command=/opt/apps/kubernetes/server/bin/kube-apiserver-startup.sh
numprocs=1
directory=/opt/apps/kubernetes/server/bin
autostart=true
autorestart=true
startsecs=30
startretries=3
exitcodes=0,2
stopsignal=QUIT
stopwaitsecs=10
user=root
redirect_stderr=true
stdout_logfile=/data/logs/kubernetes/kube-apiserver/apiserver.stdout.log
stdout_logfile_maxbytes=64MB
stdout_logfile_backups=5
stdout_capture_maxbytes=1MB
stdout_events_enabled=false
killasgroup=true
stopasgroup=true

[root@hdss7-21 bin]# mkdir /data/logs/kubernetes/kube-apiserver/ -p

[root@hdss7-21 bin]# supervisorctl update
[root@hdss7-21 bin]# supervisorctl status
etcd-server-7-21                 RUNNING   pid 23637, uptime 22:26:08
kube-apiserver-7-21              RUNNING   pid 32591, uptime 0:05:37
  • 启停apiserver
[root@hdss7-12 ~]# supervisorctl start kube-apiserver-7-21
[root@hdss7-12 ~]# supervisorctl stop kube-apiserver-7-21
[root@hdss7-12 ~]# supervisorctl restart kube-apiserver-7-21
[root@hdss7-12 ~]# supervisorctl status kube-apiserver-7-21
  • 查看进程
[root@hdss7-21 bin]# netstat -lntp|grep api
tcp        0      0 127.0.0.1:8080          0.0.0.0:*               LISTEN      32595/kube-apiserve 
tcp6       0      0 :::6443                 :::*                    LISTEN      32595/kube-apiserve 
[root@hdss7-21 bin]# ps uax|grep kube-apiserver|grep -v grep
root      32591  0.0  0.0 115296  1476 ?        S    20:17   0:00 /bin/bash /opt/apps/kubernetes/server/bin/kube-apiserver-startup.sh
root      32595  3.0  2.3 402720 184892 ?       Sl   20:17   0:16 /opt/apps/kubernetes/server/bin/kube-apiserver --apiserver-count 2 --audit-log-path /data/logs/kubernetes/kube-apiserver/audit-log --audit-policy-file ../../conf/audit.yaml --authorization-mode RBAC --client-ca-file ./certs/ca.pem --requestheader-client-ca-file ./certs/ca.pem --enable-admission-plugins NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota --etcd-cafile ./certs/ca.pem --etcd-certfile ./certs/client.pem --etcd-keyfile ./certs/client-key.pem --etcd-servers https://10.4.7.12:2379,https://10.4.7.21:2379,https://10.4.7.22:2379 --service-account-key-file ./certs/ca-key.pem --service-cluster-ip-range 192.168.0.0/16 --service-node-port-range 3000-29999 --target-ram-mb=1024 --kubelet-client-certificate ./certs/client.pem --kubelet-client-key ./certs/client-key.pem --log-dir /data/logs/kubernetes/kube-apiserver --tls-cert-file ./certs/apiserver.pem --tls-private-key-file ./certs/apiserver-key.pem --v 2

3.3. 配置apiserver L4代理

3.3.1. nginx配置

L4 代理涉及的服务器：hdss7-11，hdss7-12

[root@hdss7-11 ~]# yum install -y nginx
[root@hdss7-11 ~]# vim /etc/nginx/nginx.conf  
# 末尾加上以下内容，stream 只能加在 main 中
# 此处只是简单配置下nginx，实际生产中，建议进行更合理的配置
stream {
    log_format proxy '$time_local|$remote_addr|$upstream_addr|$protocol|$status|'
                     '$session_time|$upstream_connect_time|$bytes_sent|$bytes_received|'
                     '$upstream_bytes_sent|$upstream_bytes_received' ;

    upstream kube-apiserver {
        server 10.4.7.21:6443     max_fails=3 fail_timeout=30s;
        server 10.4.7.22:6443     max_fails=3 fail_timeout=30s;
    }
    server {
        listen 7443;
        proxy_connect_timeout 2s;
        proxy_timeout 900s;
        proxy_pass kube-apiserver;
        access_log /var/log/nginx/proxy.log proxy;
    }
}

[root@hdss7-11 ~]# systemctl start nginx; systemctl enable nginx
[root@hdss7-11 ~]# curl 127.0.0.1:7443  # 测试几次
Client sent an HTTP request to an HTTPS server.
[root@hdss7-11 ~]# cat /var/log/nginx/proxy.log 
06/Jan/2020:21:00:27 +0800|127.0.0.1|10.4.7.21:6443|TCP|200|0.001|0.000|76|78|78|76
06/Jan/2020:21:05:03 +0800|127.0.0.1|10.4.7.22:6443|TCP|200|0.020|0.019|76|78|78|76
06/Jan/2020:21:05:04 +0800|127.0.0.1|10.4.7.21:6443|TCP|200|0.001|0.001|76|78|78|76

3.3.2. keepalived配置

aipserver L4 代理涉及的服务器：hdss7-11，hdss7-12

  • 安装keepalive
[root@hdss7-11 ~]# yum install -y keepalived
[root@hdss7-11 ~]# vim /etc/keepalived/check_port.sh # 配置检查脚本
#!/bin/bash
if [ $# -eq 1 ] && [[ $1 =~ ^[0-9]+ ]];then
    [ $(netstat -lntp|grep ":$1 " |wc -l) -eq 0 ] && echo "[ERROR] nginx may be not running!" && exit 1 || exit 0
else
    echo "[ERROR] need one port!"
    exit 1
fi
[root@hdss7-11 ~]# chmod +x /etc/keepalived/check_port.sh
  • 配置主节点：/etc/keepalived/keepalived.conf

主节点中，必须加上nopreempt

因为一旦因为网络抖动导致VIP漂移，不能让它自动飘回来，必须要分析原因后手动迁移VIP到主节点！如主节点确认正常后，重启备节点的keepalive，让VIP飘到主节点.

keepalived 的日志输出配置此处省略，生产中需要进行处理。

vi /etc/keepalived/keepalived.conf 

! Configuration File for keepalived
global_defs {
   router_id 10.4.7.11
}
vrrp_script chk_nginx {
    script "/etc/keepalived/check_port.sh 7443"
    interval 2
    weight -20
}
vrrp_instance VI_1 {
    state MASTER
    interface ens32
    virtual_router_id 251
    priority 100
    advert_int 1
    mcast_src_ip 10.4.7.11
    nopreempt

    authentication {
        auth_type PASS
        auth_pass 11111111
    }
    track_script {
         chk_nginx
    }
    virtual_ipaddress {
        10.4.7.10
    }
}

  • 配置备节点：/etc/keepalived/keepalived.conf

    注意根据实际的网卡名称更改网卡名配置。

vi /etc/keepalived/keepalived.conf 

! Configuration File for keepalived
global_defs {
    router_id 10.4.7.12
}
vrrp_script chk_nginx {
    script "/etc/keepalived/check_port.sh 7443"
    interval 2
    weight -20
}
vrrp_instance VI_1 {
    state BACKUP
    interface ens32
    virtual_router_id 251
    mcast_src_ip 10.4.7.12
    priority 90
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 11111111
    }
    track_script {
        chk_nginx
    }
    virtual_ipaddress {
        10.4.7.10
    }
}
  • 启动keepalived
[root@hdss7-11 ~]# systemctl start keepalived ; systemctl enable keepalived
[root@hdss7-11 ~]# ip addr show ens32
2: ens32: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:6d:b8:82 brd ff:ff:ff:ff:ff:ff
    inet 10.4.7.11/24 brd 10.4.7.255 scope global noprefixroute ens32
       valid_lft forever preferred_lft forever
    inet 10.4.7.10/32 scope global ens32
       valid_lft forever preferred_lft forever
......

3.4. controller-manager 安装

controller-manager 涉及的服务器：hdss7-21，hdss7-22

controller-manager 设置为只调用当前机器的 apiserver，走127.0.0.1网卡，因此不配制SSL证书

[root@hdss7-21 ~]# vim /opt/apps/kubernetes/server/bin/kube-controller-manager-startup.sh
#!/bin/sh
WORK_DIR=$(dirname $(readlink -f $0))
[ $? -eq 0 ] && cd $WORK_DIR || exit

/opt/apps/kubernetes/server/bin/kube-controller-manager 
    --cluster-cidr 172.7.0.0/16 
    --leader-elect true 
    --log-dir /data/logs/kubernetes/kube-controller-manager 
    --master http://127.0.0.1:8080 
    --service-account-private-key-file ./certs/ca-key.pem 
    --service-cluster-ip-range 192.168.0.0/16 
    --root-ca-file ./certs/ca.pem 
    --v 2
[root@hdss7-21 ~]# chmod u+x /opt/apps/kubernetes/server/bin/kube-controller-manager-startup.sh

[root@hdss7-21 ~]# vim /etc/supervisord.d/kube-controller-manager.ini
[program:kube-controller-manager-7-21]
command=/opt/apps/kubernetes/server/bin/kube-controller-manager-startup.sh                     
numprocs=1                                                                        
directory=/opt/apps/kubernetes/server/bin                                             
autostart=true                                                                    
autorestart=true                                                                  
startsecs=30                                                                      
startretries=3                                                                    
exitcodes=0,2                                                                     
stopsignal=QUIT                                                                   
stopwaitsecs=10                                                                  
user=root                                                                        
redirect_stderr=true                                                             
stdout_logfile=/data/logs/kubernetes/kube-controller-manager/controller.stdout.log  
stdout_logfile_maxbytes=64MB                                                      
stdout_logfile_backups=4                                                        
stdout_capture_maxbytes=1MB                                                     
stdout_events_enabled=false   
killasgroup=true
stopasgroup=true

[root@hdss7-21 ~]# mkdir /data/logs/kubernetes/kube-controller-manager
[root@hdss7-21 ~]# supervisorctl update
kube-controller-manager-7-21: stopped
kube-controller-manager-7-21: updated process group
[root@hdss7-21 ~]# supervisorctl status
etcd-server-7-21                 RUNNING   pid 23637, uptime 1 day, 0:16:54
kube-apiserver-7-21              RUNNING   pid 32591, uptime 1:56:23
kube-controller-manager-7-21     RUNNING   pid 33357, uptime 0:00:38

3.5. kube-scheduler安装

kube-scheduler 涉及的服务器：hdss7-21，hdss7-22

kube-scheduler 设置为只调用当前机器的 apiserver，走127.0.0.1网卡，因此不配制SSL证书

[root@hdss7-21 ~]# vim /opt/apps/kubernetes/server/bin/kube-scheduler-startup.sh
#!/bin/sh
WORK_DIR=$(dirname $(readlink -f $0))
[ $? -eq 0 ] && cd $WORK_DIR || exit

/opt/apps/kubernetes/server/bin/kube-scheduler 
    --leader-elect  
    --log-dir /data/logs/kubernetes/kube-scheduler 
    --master http://127.0.0.1:8080 
    --v 2
[root@hdss7-21 ~]# chmod u+x /opt/apps/kubernetes/server/bin/kube-scheduler-startup.sh
[root@hdss7-21 ~]# mkdir -p /data/logs/kubernetes/kube-scheduler

[root@hdss7-21 ~]# vim /etc/supervisord.d/kube-scheduler.ini
[program:kube-scheduler-7-21]
command=/opt/apps/kubernetes/server/bin/kube-scheduler-startup.sh                     
numprocs=1                                                               
directory=/opt/apps/kubernetes/server/bin                                     
autostart=true                                                           
autorestart=true                                                         
startsecs=30                                                             
startretries=3                                                           
exitcodes=0,2                                                            
stopsignal=QUIT                                                          
stopwaitsecs=10                                                          
user=root                                                                
redirect_stderr=true                                                     
stdout_logfile=/data/logs/kubernetes/kube-scheduler/scheduler.stdout.log 
stdout_logfile_maxbytes=64MB                                             
stdout_logfile_backups=4                                                 
stdout_capture_maxbytes=1MB                                              
stdout_events_enabled=false
killasgroup=true
stopasgroup=true

[root@hdss7-21 ~]# supervisorctl update
kube-scheduler-7-21: stopped
kube-scheduler-7-21: updated process group
[root@hdss7-21 ~]# supervisorctl status 
etcd-server-7-21                 RUNNING   pid 23637, uptime 1 day, 0:26:53
kube-apiserver-7-21              RUNNING   pid 32591, uptime 2:06:22
kube-controller-manager-7-21     RUNNING   pid 33357, uptime 0:10:37
kube-scheduler-7-21              RUNNING   pid 33450, uptime 0:01:18

3.6. 检查主控节点状态

[root@hdss7-21 ~]# ln -s /opt/apps/kubernetes/server/bin/kubectl /usr/local/bin/
[root@hdss7-21 ~]# kubectl get cs
NAME                 STATUS    MESSAGE              ERROR
scheduler            Healthy   ok                   
controller-manager   Healthy   ok                   
etcd-1               Healthy   {"health": "true"}   
etcd-0               Healthy   {"health": "true"}   
etcd-2               Healthy   {"health": "true"}   

[root@hdss7-22 ~]# ln -s /opt/apps/kubernetes/server/bin/kubectl /usr/local/bin/
[root@hdss7-22 ~]# kubectl get cs
NAME                 STATUS    MESSAGE              ERROR
controller-manager   Healthy   ok                   
scheduler            Healthy   ok                   
etcd-2               Healthy   {"health": "true"}   
etcd-1               Healthy   {"health": "true"}   
etcd-0               Healthy   {"health": "true"}

4. 运算节点部署

4.1. kubelet 部署

4.1.1. 签发证书

证书签发在 hdss7-200 操作

[root@hdss7-200 ~]# cd /opt/certs/
[root@hdss7-200 certs]# vim kubelet-csr.json # 将所有可能的kubelet机器IP添加到hosts中
{
    "CN": "k8s-kubelet",
    "hosts": [
    "127.0.0.1",
    "10.4.7.10",
    "10.4.7.21",
    "10.4.7.22",
    "10.4.7.23",
    "10.4.7.24",
    "10.4.7.25",
    "10.4.7.26",
    "10.4.7.27",
    "10.4.7.28"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "beijing",
            "L": "beijing",
            "O": "od",
            "OU": "ops"
        }
    ]
}
[root@hdss7-200 certs]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=server kubelet-csr.json | cfssl-json -bare kubelet
2020/01/06 23:10:56 [INFO] generate received request
2020/01/06 23:10:56 [INFO] received CSR
2020/01/06 23:10:56 [INFO] generating key: rsa-2048
2020/01/06 23:10:56 [INFO] encoded CSR
2020/01/06 23:10:56 [INFO] signed certificate with serial number 61221942784856969738771370531559555767101820379
2020/01/06 23:10:56 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);
specifically, section 10.2.3 ("Information Requirements").

[root@hdss7-200 certs]# ls kubelet* -l
-rw-r--r-- 1 root root 1115 Jan  6 23:10 kubelet.csr
-rw-r--r-- 1 root root  452 Jan  6 23:10 kubelet-csr.json
-rw------- 1 root root 1675 Jan  6 23:10 kubelet-key.pem
-rw-r--r-- 1 root root 1468 Jan  6 23:10 kubelet.pem

[root@hdss7-200 certs]# for i in 21 22;do scp kubelet.pem kubelet-key.pem hdss7-$i:/opt/apps/kubernetes/server/bin/certs/;done

4.1.2. 创建kubelet配置

kubelet配置在 hdss7-21 hdss7-22 操作

  • set-cluster # 创建需要连接的集群信息，可以创建多个k8s集群信息
[root@hdss7-21 ~]# kubectl config set-cluster myk8s 
--certificate-authority=/opt/apps/kubernetes/server/bin/certs/ca.pem 
--embed-certs=true 
--server=https://10.4.7.10:7443 
--kubeconfig=/opt/apps/kubernetes/conf/kubelet.kubeconfig
  • set-credentials # 创建用户账号，即用户登陆使用的客户端私有和证书，可以创建多个证书
[root@hdss7-21 ~]# kubectl config set-credentials k8s-node 
--client-certificate=/opt/apps/kubernetes/server/bin/certs/client.pem 
--client-key=/opt/apps/kubernetes/server/bin/certs/client-key.pem 
--embed-certs=true 
--kubeconfig=/opt/apps/kubernetes/conf/kubelet.kubeconfig
  • set-context # 设置context，即确定账号和集群对应关系
[root@hdss7-21 ~]# kubectl config set-context myk8s-context 
--cluster=myk8s 
--user=k8s-node 
--kubeconfig=/opt/apps/kubernetes/conf/kubelet.kubeconfig
  • use-context # 设置当前使用哪个context
[root@hdss7-21 ~]# kubectl config use-context myk8s-context --kubeconfig=/opt/apps/kubernetes/conf/kubelet.kubeconfig

4.1.3. 授权k8s-node用户

此步骤只需要在一台master节点执行

授权 k8s-node 用户绑定集群角色 system:node ，让 k8s-node 成为具备运算节点的权限。

[root@hdss7-21 ~]# vim k8s-node.yaml
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  name: k8s-node
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:node
subjects:
- apiGroup: rbac.authorization.k8s.io
  kind: User
  name: k8s-node
[root@hdss7-21 ~]# kubectl create -f k8s-node.yaml 
clusterrolebinding.rbac.authorization.k8s.io/k8s-node created
[root@hdss7-21 ~]# kubectl get clusterrolebinding k8s-node
NAME       AGE
k8s-node   36s

4.1.4. 装备pause镜像

将pause镜像放入到harbor私有仓库中，仅在 hdss7-200 操作：

[root@hdss7-200 ~]# docker image pull kubernetes/pause
[root@hdss7-200 ~]# docker image tag kubernetes/pause:latest harbor.od.com/public/pause:latest
[root@hdss7-200 ~]# docker login -u admin harbor.od.com
[root@hdss7-200 ~]# docker image push harbor.od.com/public/pause:latest

4.1.5. 创建启动脚本

在node节点创建脚本并启动kubelet，涉及服务器： hdss7-21 hdss7-22

[root@hdss7-21 ~]# vim /opt/apps/kubernetes/server/bin/kubelet-startup.sh
#!/bin/sh
# 注意修改主机名
WORK_DIR=$(dirname $(readlink -f $0))
[ $? -eq 0 ] && cd $WORK_DIR || exit

/opt/apps/kubernetes/server/bin/kubelet 
    --anonymous-auth=false 
    --cgroup-driver systemd 
    --cluster-dns 192.168.0.2 
    --cluster-domain cluster.local 
    --runtime-cgroups=/systemd/system.slice 
    --kubelet-cgroups=/systemd/system.slice 
    --fail-swap-on="false" 
    --client-ca-file ./certs/ca.pem 
    --tls-cert-file ./certs/kubelet.pem 
    --tls-private-key-file ./certs/kubelet-key.pem 
    --hostname-override hdss7-21.host.com 
    --image-gc-high-threshold 20 
    --image-gc-low-threshold 10 
    --kubeconfig ../../conf/kubelet.kubeconfig 
    --log-dir /data/logs/kubernetes/kube-kubelet 
    --pod-infra-container-image harbor.od.com/public/pause:latest 
    --root-dir /data/kubelet
[root@hdss7-21 ~]# chmod u+x /opt/apps/kubernetes/server/bin/kubelet-startup.sh
[root@hdss7-21 ~]# mkdir -p /data/logs/kubernetes/kube-kubelet /data/kubelet

[root@hdss7-21 ~]# vim /etc/supervisord.d/kube-kubelet.ini
[program:kube-kubelet-7-21]
command=/opt/apps/kubernetes/server/bin/kubelet-startup.sh
numprocs=1
directory=/opt/apps/kubernetes/server/bin
autostart=true
autorestart=true
startsecs=30
startretries=3
exitcodes=0,2
stopsignal=QUIT
stopwaitsecs=10
user=root
redirect_stderr=true
stdout_logfile=/data/logs/kubernetes/kube-kubelet/kubelet.stdout.log
stdout_logfile_maxbytes=64MB
stdout_logfile_backups=5
stdout_capture_maxbytes=1MB
stdout_events_enabled=false
killasgroup=true
stopasgroup=true

[root@hdss7-21 ~]# supervisorctl update
[root@hdss7-21 ~]# supervisorctl status
etcd-server-7-21                 RUNNING   pid 23637, uptime 1 day, 14:56:25
kube-apiserver-7-21              RUNNING   pid 32591, uptime 16:35:54
kube-controller-manager-7-21     RUNNING   pid 33357, uptime 14:40:09
kube-kubelet-7-21                RUNNING   pid 37232, uptime 0:01:08
kube-scheduler-7-21              RUNNING   pid 33450, uptime 14:30:50
[root@hdss7-21 ~]# kubectl get node
NAME                STATUS   ROLES    AGE     VERSION
hdss7-21.host.com   Ready    <none>   3m13s   v1.15.2
hdss7-22.host.com   Ready    <none>   3m13s   v1.15.2

4.1.6. 修改节点角色

使用 kubectl get nodes 获取的Node节点角色为空，可以按照以下方式修改,这个操作只是在节点上面打了个标签。

[root@hdss7-21 ~]# kubectl get node
NAME                STATUS   ROLES    AGE     VERSION
hdss7-21.host.com   Ready    <none>   3m13s   v1.15.2
hdss7-22.host.com   Ready    <none>   3m13s   v1.15.2
[root@hdss7-21 ~]# kubectl label node hdss7-21.host.com node-role.kubernetes.io/node=
node/hdss7-21.host.com labeled
[root@hdss7-21 ~]# kubectl label node hdss7-21.host.com node-role.kubernetes.io/master=
node/hdss7-21.host.com labeled
[root@hdss7-21 ~]# kubectl label node hdss7-22.host.com node-role.kubernetes.io/master=
node/hdss7-22.host.com labeled
[root@hdss7-21 ~]# kubectl label node hdss7-22.host.com node-role.kubernetes.io/node=
node/hdss7-22.host.com labeled
[root@hdss7-21 ~]# kubectl get node
NAME                STATUS   ROLES         AGE     VERSION
hdss7-21.host.com   Ready    master,node   7m44s   v1.15.2
hdss7-22.host.com   Ready    master,node   7m44s   v1.15.2

4.2. kube-proxy部署

4.2.1. 签发证书

证书签发在 hdss7-200 操作

[root@hdss7-200 ~]# cd /opt/certs/
# CN 其实是k8s中的角色
[root@hdss7-200 certs]# cat>>kube-proxy-csr.json<<EOF 
{
    "CN": "system:kube-proxy",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "beijing",
            "L": "beijing",
            "O": "od",
            "OU": "ops"
        }
    ]
}
EOF

[root@hdss7-200 certs]# cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=client kube-proxy-csr.json |cfssl-json -bare kube-proxy-client
2020/01/07 21:45:53 [INFO] generate received request
2020/01/07 21:45:53 [INFO] received CSR
2020/01/07 21:45:53 [INFO] generating key: rsa-2048
2020/01/07 21:45:53 [INFO] encoded CSR
2020/01/07 21:45:53 [INFO] signed certificate with serial number 620191685968917036075463174423999296907693104226
2020/01/07 21:45:53 [WARNING] This certificate lacks a "hosts" field. This makes it unsuitable for
websites. For more information see the Baseline Requirements for the Issuance and Management
of Publicly-Trusted Certificates, v.1.1.6, from the CA/Browser Forum (https://cabforum.org);

# 因为kube-proxy使用的用户是kube-proxy，不能使用client证书，必须要重新签发自己的证书
[root@hdss7-200 certs]# ls kube-proxy-c* -l  
-rw-r--r-- 1 root root 1005 Jan  7 21:45 kube-proxy-client.csr
-rw------- 1 root root 1675 Jan  7 21:45 kube-proxy-client-key.pem
-rw-r--r-- 1 root root 1375 Jan  7 21:45 kube-proxy-client.pem
-rw-r--r-- 1 root root  267 Jan  7 21:45 kube-proxy-csr.json

[root@hdss7-200 certs]# scp kube-proxy-client-key.pem kube-proxy-client.pem hdss7-21:/opt/apps/kubernetes/server/bin/certs/                                                                         100% 1375   870.6KB/s   00:00    
[root@hdss7-200 certs]# scp kube-proxy-client-key.pem kube-proxy-client.pem hdss7-22:/opt/apps/kubernetes/server/bin/certs/

for i in 21 22;do scp kube-proxy-client-key.pem kube-proxy-client.pem hdss7-$i:/opt/apps/kubernetes/server/bin/certs/;done

4.2.2. 创建kube-proxy配置

在所有node节点创建，涉及服务器：hdss7-21 ，hdss7-22

[root@hdss7-21 ~]# kubectl config set-cluster myk8s 
--certificate-authority=/opt/apps/kubernetes/server/bin/certs/ca.pem 
--embed-certs=true 
--server=https://10.4.7.10:7443 
--kubeconfig=/opt/apps/kubernetes/conf/kube-proxy.kubeconfig
  
[root@hdss7-21 ~]# kubectl config set-credentials kube-proxy 
--client-certificate=/opt/apps/kubernetes/server/bin/certs/kube-proxy-client.pem 
--client-key=/opt/apps/kubernetes/server/bin/certs/kube-proxy-client-key.pem 
--embed-certs=true 
--kubeconfig=/opt/apps/kubernetes/conf/kube-proxy.kubeconfig
  
[root@hdss7-21 ~]# kubectl config set-context myk8s-context 
--cluster=myk8s 
--user=kube-proxy 
--kubeconfig=/opt/apps/kubernetes/conf/kube-proxy.kubeconfig
  
[root@hdss7-21 ~]# kubectl config use-context myk8s-context --kubeconfig=/opt/apps/kubernetes/conf/kube-proxy.kubeconfig

4.2.3. 加载ipvs模块

kube-proxy 共有3种流量调度模式，分别是 namespace，iptables，ipvs，其中ipvs性能最好。

[root@hdss7-21 ~]# for i in $(ls /usr/lib/modules/$(uname -r)/kernel/net/netfilter/ipvs|grep -o "^[^.]*");do echo $i; /sbin/modinfo -F filename $i >/dev/null 2>&1 && /sbin/modprobe $i;done
[root@hdss7-21 ~]# lsmod | grep ip_vs  # 查看ipvs模块

4.2.4. 创建启动脚本

# 注意更改主机名
[root@hdss7-21 ~]# vim /opt/apps/kubernetes/server/bin/kube-proxy-startup.sh
#!/bin/sh

WORK_DIR=$(dirname $(readlink -f $0))
[ $? -eq 0 ] && cd $WORK_DIR || exit

/opt/apps/kubernetes/server/bin/kube-proxy 
  --cluster-cidr 172.7.0.0/16 
  --hostname-override hdss7-21.host.com 
  --proxy-mode=ipvs 
  --ipvs-scheduler=nq 
  --kubeconfig ../../conf/kube-proxy.kubeconfig
[root@hdss7-21 ~]# chmod u+x /opt/apps/kubernetes/server/bin/kube-proxy-startup.sh
[root@hdss7-21 ~]# mkdir -p /data/logs/kubernetes/kube-proxy
[root@hdss7-21 ~]# vim /etc/supervisord.d/kube-proxy.ini
[program:kube-proxy-7-21]
command=/opt/apps/kubernetes/server/bin/kube-proxy-startup.sh                
numprocs=1                                                      
directory=/opt/apps/kubernetes/server/bin                            
autostart=true                                                  
autorestart=true                                                
startsecs=30                                                    
startretries=3                                                  
exitcodes=0,2                                                   
stopsignal=QUIT                                                 
stopwaitsecs=10                                                 
user=root                                                       
redirect_stderr=true                                            
stdout_logfile=/data/logs/kubernetes/kube-proxy/proxy.stdout.log
stdout_logfile_maxbytes=64MB                                    
stdout_logfile_backups=5                                       
stdout_capture_maxbytes=1MB                                     
stdout_events_enabled=false
killasgroup=true
stopasgroup=true

[root@hdss7-21 ~]# supervisorctl update

4.2.5. 验证集群

[root@hdss7-21 ~]# supervisorctl status
etcd-server-7-21                 RUNNING   pid 23637, uptime 2 days, 0:27:18
kube-apiserver-7-21              RUNNING   pid 32591, uptime 1 day, 2:06:47
kube-controller-manager-7-21     RUNNING   pid 33357, uptime 1 day, 0:11:02
kube-kubelet-7-21                RUNNING   pid 37232, uptime 9:32:01
kube-proxy-7-21                  RUNNING   pid 47088, uptime 0:06:19
kube-scheduler-7-21              RUNNING   pid 33450, uptime 1 day, 0:01:43

[root@hdss7-21 ~]# yum install -y ipvsadm
[root@hdss7-21 ~]# ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  192.168.0.1:443 nq
  -> 10.4.7.21:6443               Masq    1      0          0         
  -> 10.4.7.22:6443               Masq    1      0          0  

cat >/root/nginx-ds.yaml <<'EOF'
apiVersion: extensions/v1beta1
kind: DaemonSet
metadata:
  name: nginx-ds
spec:
  template:
    metadata:
      labels:
        app: nginx-ds
    spec:
      containers:
      - name: my-nginx
        image: harbor.od.com/public/nginx:v1.17.9
        ports:
        - containerPort: 80
EOF

[root@hdss7-21 ~]# kubectl apply -f nginx-ds.yaml
[root@hdss7-21 ~]# kubectl get pods -o wide
NAME             READY   STATUS    RESTARTS   AGE   IP           NODE                NOMINATED NODE   READINESS GATES
nginx-ds-cfc8d   1/1     Running   0          64s   172.7.22.2   hdss7-22.host.com   <none>           <none>
nginx-ds-vd4mk   1/1     Running   0          64s   172.7.21.2   hdss7-21.host.com   <none>           <none>


[root@hdss7-21 ~]# curl -I 172.7.21.2
HTTP/1.1 200 OK
Server: nginx/1.17.6
Date: Tue, 07 Jan 2020 14:28:46 GMT
Content-Type: text/html
Content-Length: 612
Last-Modified: Tue, 19 Nov 2019 12:50:08 GMT
Connection: keep-alive
ETag: "5dd3e500-264"
Accept-Ranges: bytes

[root@hdss7-21 ~]# curl -I 172.7.22.2  # 缺少网络插件，无法跨节点通信

标签：#:#-#文件 | 浏览：250 | 发布日期：

免责声明：文章转载自《二进制部署K8S-2集群部署》仅用于学习参考。如对内容有疑问，请及时联系本站处理。

上篇读DataSnap源代码（一）项目部署(一、docker安装与使用)下篇

宿迁高防，2C2G15M，22元/月；香港BGP，2C5G5M，25元/月 雨云优惠码：MjYwNzM=

相关文章

C#中使用Surfer

做地理信息或者绘制等值线，都会选择Surfer这个软件。这个软件对我们的作用有两个(1)插值(2)绘图。 软件：Windows 7 x64，Microsoft Visual Studio 2012 RC，Surfer 10 一、添加引用，Surfer在COM组件中。 然后在代码中加入 using Surfer; 二、创建一组原始数据文件命名为data.d...

内网开发机虚拟化（kvm+qemu）

CentOS 7 安装 a. U盘安装，请选择minimal版本。（DVD那个版本，后面需要把DVD的iso还要放在u盘目录下，但DVD超过4G，用ntfs不好搞） b. 制作启动盘，Mac可用unetbootin，win下可以用大白菜那个启动u盘制作工具，把iso写入u盘，同时把iso原始文件复制到u盘目录下 c. 机器插上u盘启动 d. 启动菜单按ta...

PHP 原生实现MVC框架

2017-6-5 由于工作需要 打算自己实现一个简单的  MVC框架以完成工作需求   初步定义 框架需要完成的工作 1.单入口的路由功能 2.文件的自动载入 3.流水ID的加密以及自动解密 4.MVC文件夹模式 5.通用模板的引用     单入口的路由实现   项目接口的 public 目录中存在一个index.php 文件 作为 项目的唯一入口   文...

a.download下载文件 ---跨域问题

下载文件，使用a.download var a = document.createElement('a') a.download = row.fileName || 'pic' a.href = row.src; a.click() 预览文件 window.open(row.src) 　预览文件只能预览图片文件和pdf a.download在跨域中是...

linux笔记1(创建用户、安装gcc、安装五笔输入法)

linux笔记1(创建用户、安装gcc、安装五笔输入法) linux简说 内核：在计算机启动时载入基本内存，管理一些基本的输入输出，管理一些进程的初始化以及进程之间的调 试。控制硬件的运行。   Shell:系统的命令解释器，用户进程与kernel的桥梁作用 终端模拟器(Terminal Emulator):交互操作系统，并得到提示与反馈。   x...

TS的tsconfig.json配置

一切教程以官方文档为准 　　初始化一个tsconfig.json配置文件tsc --init 信息配置信息： { "compilerOptions": { // "incremental": true, // 增置编译 // "tsBuildlnfoFile": "./buildFile",...

最新文章

随机推荐

思享工具箱导航