摘要：
一、错误报错原因：在删除或者复制移动时，磁盘或者u盘等外接硬件设备，忽然掉落（断掉，接口松动），在次挂载磁盘时就会出现错误错误日志：$MFTMirrdoesnotmatch$MFT(record0).Failedtomount'/dev/sdc1':输入/输出错误NTFSiseitherinconsistent,orthereisahardwarefault,orit'saSoftRAID/Fak
一、错误
报错原因：
在删除或者复制移动时，磁盘或者u盘等外接硬件设备，忽然掉落（断掉，接口松动），在次挂载磁盘时就会出现错误
错误日志：
$MFTMirr does not match $MFT (record 0).
Failed to mount '/dev/sdc1': 输入/输出错误
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID thenfirst activate
it and mount a different device under the /dev/mapper/directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid'documentation
for more details.二、解决方法
简单解决：
linux ~ # ntfsfix /dev/sdc1
Mounting volume... $MFTMirr does not match $MFT (record 0).
FAILED
Attempting to correct errors...
Processing $MFT and $MFTMirr...
Reading $MFT... OK
Reading $MFTMirr... OK
Comparing $MFTMirr to $MFT... FAILED
Correcting differences in $MFTMirr record 0...OK
Processing of $MFT and $MFTMirr completed successfully.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... OK
Checking the alternate boot sector... OK
NTFS volume version is 3.1.
NTFS partition /dev/sdc1 was processed successfully.重新插入磁盘：
linux ~ # df -hT
文件系统 类型 容量 已用 可用 已用%挂载点
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 383M 9.4M 374M 3% /run
/dev/sda1 ext4 459G 70G 366G 16% /
tmpfs tmpfs 1.9G 21M 1.9G 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup
/dev/sdb1 ext4 9.3G 213M 8.6G 3% /boot
cgmfs tmpfs 100K 0 100K 0% /run/cgmanager/fs
tmpfs tmpfs 383M 0 383M 0% /run/user/122
tmpfs tmpfs 383M 16K 383M 1% /run/user/1000
/dev/sdc1 fuseblk 932G 161G 772G 18% /media/linux/Seagate Backup Plus Drive重新挂载之后就ｏｋ了