思享工具箱

shell脚本实现多台服务器自动巡检

摘要：
//www.cnblogs.com/xread/p/77766300.htmlshell脚本实现了多个服务器的自动巡逻摘要：

转至：https://www.cnblogs.com/xred/p/7766300.html

shell脚本实现多台服务器自动巡检
 
摘要：
 
        运维服务一个项目二十多台（或者多台）服务器，每天要做服务器的性能巡检工作是查看服务器的CPU、内存、磁盘空间是否在正常值范围内。像这样每天或者每个固定时间段都做相同的重复工作，为了简化重复的工作，我写了基于liunx服务器的自动巡检脚本，在crontab中设定一个固定时间进行自动执行即可，以减少人工重复劳动的工作。
 
环境：
 
        我的项目上主要服务器是LINUX和AIX两种服务器，总数在30台左右。现在的工作量是每周巡检两次，都是手动登录到每台服务器使用相应的命令查看服务器性能参数。
 
思路：
 
1、所有的服务器之间的网络都是在同一个局域网内，所有网络两两相通。
 
2、在其中选择一台性能相对较好或者是服务器运行压力较小的服务器，作为巡检服务器。
 
3、通过这一服务器来实现对其他服务器的巡检，然后把巡检结果记录到巡检服务器上。
 
4、每台服务器巡检结果都以时间和ip做命名用来区分，最后将所有巡检结果压缩打包。
 
5、每次维护人员只需要定时去取这个压缩包查看最后结果即可，免去了对每台服务器都需要登录和输入相同的命令进行查看。
 
具体实现脚本：


 cat check.sh 

#! /bin/bash
echo "start running" | tee -a 
LANG=en
set `date`
path="/home/check"
echo "start running" | tee -a  $path/log/$1-$2-$3.log
if [ -d /home/check/result/$1-$2-$3 ];
 then
   echo ''
else
mkdir -p /home/check/result/$1-$2-$3
echo `date +"%Y/%m/%d-%H:%M:%S"` "create " "$1-$2-$3" "directory success "|tee -a $path/log/$1-$2-$3.log
fi
echo `date +"%Y/%m/%d-%H:%M:%S"` "starting reading linuxconfig.txt " |tee -a $path/log/$1-$2-$3.log
cat "$path"/config/linuxconfig.txt| while read line;
do
ip=`echo $line |cut -d '=' -f2`
echo `date +"%Y/%m/%d-%H:%M:%S"` "check LINUX " $ip " starting " |tee -a $path/log/$1-$2-$3.log
(
sleep 1
#echo account
 echo root

sleep 1
#echo password
 echo root

sleep 3
echo "free -k"
echo ""
echo "df -k"
echo ""

#memory_used_rate
echo "ps -ef| grep java"
echo ""
echo "netstat -an|egrep -n '80|22|21|23|9043|9044|45331|45332|39194|19195'"
echo ""
#echo "ifconfig -a "
echo  "/sbin/ip ad"
echo ""

echo " tail -2000  /var/log/messages | grep -v snmp |grep  -i  error "
echo ""
echo "/bin/dmesg  |grep -i error"
echo ""

echo "top -n1|sed -n '1,5p'"
echo "exit"
echo "/usr/bin/vmstat  1 3"
echo ""

sleep 5
)|telnet $ip >/home/check/result/$1-$2-$3/$ip-$1-$2-$3-$4.txt
echo `date +"%Y/%m/%d-%H:%M:%S"` "check LINUX " $ip " end" |tee -a $path/log/$1-$2-$3.log
echo "" | tee -a $path/log/$1-$2-$3.log
done
echo `date +"%Y/%m/%d-%H:%M:%S"` "end reading linuxconfig.txt  " |tee -a $path/log/$1-$2-$3.log
 
echo `date +"%Y/%m/%d-%H:%M:%S"` "starting reading AIXconfig.txt " | tee -a $path/log/$1-$2-$3.log
cat "$path"/config/AIXconfig.txt| while read line;
do
ip=`echo $line |cut -d '=' -f2`
echo `date +"%Y/%m/%d-%H:%M:%S"` "check IBM AIX " $ip " starting " |tee -a $path/log/$1-$2-$3.log
(
sleep 1
#echo account
 echo root

sleep 1
#echo password
 echo root
sleep 5
echo ""
#echo "df -k"
 echo "df -g"
echo ""

#memory_used_rate
echo "ps -ef| grep java"
echo ""
echo "netstat -an|egrep -n '80|22|21|23|9043|9044|45331|45332|39194|19195'"
echo ""
echo "ifconfig -a"
echo ""
echo "topas"
echo "exit"
sleep 5
)|telnet $ip >/home/check/result/$1-$2-$3/$ip-$1-$2-$3-$4.txt
echo `date +"%Y/%m/%d-%H:%M:%S"` "check IBM AIX " $ip " end " |tee -a $path/log/$1-$2-$3.log
echo "" | tee -a $path/log/$1-$2-$3.log
done
echo `date +"%Y/%m/%d-%H:%M:%S"` "end reading AIXconfig.txt " | tee -a $path/log/$1-$2-$3.log
zip -r /home/check/result/$1-$2-$3/$1-$2-$3.zip /home/check/result/$1-$2-$3/*
echo "End running "

注意：
 
该脚本的巡检是基于TELNET服务所以被检服务器必须开启TELNET服务

感谢:http://blog.chinaunix.net/uid-14824714-id-4181103.html

脚本二

转至：

    #!/bin/bash  
    #admin:spirits  
      
    #***********CPU检测*************  
    echo "`date '+%Y年%m月%d日 %H:%M:%S'` 数据库服务器硬件情况开始巡检。。。"  
      
    top -bn 6 >>top  
      
    grep -n "%id" top >> newtop  
      
    grep -n "zombie" top >> insisttop  
      
    top1=`cat  newtop   | awk '{print $5}' | sed -n 4p | sed 's/%//g' |sed 's/id,//g'`  
    top2=`cat  newtop   | awk '{print $5}' | sed -n 5p | sed 's/%//g' |sed 's/id,//g'`  
    top3=`cat  newtop   | awk '{print $5}' | sed -n 6p | sed 's/%//g' |sed 's/id,//g'`  
      
    top4=`cat insisttop | awk '{print $10}' | sed -n 2p | sed 's/%//g' |sed 's/id,//g'`  
      
    #echo "top4:$top4"  
      
    if [ $top4 -gt 0 ]  
      
    then   
        echo "`date '+%Y年%m月%d日 %H:%M:%S'` 采集处理服务器上出现僵尸进程，巡检程序将自动kill该进程，如需人工确认请执行命令top后再执行ps -A -ostat,ppid,pid,cmd | grep -e '^[Zz]'来确认是否将僵尸进程杀死"  >> ./newreport.txt  
      
        ps -A -o stat,ppid,pid,cmd | grep -e '^[Zz]' | awk '{print $2}' | xargs kill -9  
      
    else   
        echo "`date '+%Y年%m月%d日 %H:%M:%S'` 采集处理服务器上无僵尸进程正常运行！"  
    fi  
      
    a=${top1:0:2}  
    b=${top2:0:2}  
    c=${top3:0:2}  
      
    echo "top1: $a"  
    echo "top2: $b"  
    echo "top3: $c"  
      
      
     if [  $a    -lt  20  ]&&[  $b    -lt  20  ]&&[  $c    -lt  20  ]    ; then  
      
        echo  "`date '+%Y年%m月%d日 %H:%M:%S'` 数据库服务器CPU占用率不正常，top取到的值是$top1,$top2,$top3,小于参考值20，请及时处理！" >> ./newreport.txt  
      
    else  
      
      echo "CPU占用率正常!"   
      
    fi  
      
    rm -rf top  
      
    rm -rf newtop  
      
    rm -rf insisttop  
      
    #***************内存检测***********  
    free1=`free -g | awk '{print $4}' | sed -n 3p | sed 's/%//g' |sed 's/t//g'`  
      
    total=`free -g | awk '{print $2}' | sed -n 2p | sed 's/%//g' |sed 's/t//g'`  
      
    canshu=0.2  
      
    tempd=`echo $total $canshu |awk '{print $1*$2}'`  
      
    biaozhun=${tempd%.*}  
      
    if [ $free1  -le  $biaozhun  ]  ;  then   
    echo "`date '+%Y年%m月%d日 %H:%M:%S'`  数据库服务器内存占用率过高，free -g取到的值是$free1,小于等于参考值$biaozhun，请及时处理！" >> ./newreport.txt  
      
    else  
      
    echo "内存占用率正常！"  
      
    fi  
      
    #**************文件系统巡检**********  
    df1=`df -h | awk '{print $5}' | sed -n 2p | sed 's/%//g'`  
    df2=`df -h | awk '{print $5}' | sed -n 3p | sed 's/%//g'`  
    df3=`df -h | awk '{print $5}' | sed -n 4p | sed 's/%//g'`  
    df4=`df -h | awk '{print $5}' | sed -n 5p | sed 's/%//g'`  
    df5=`df -h | awk '{print $5}' | sed -n 6p | sed 's/%//g'`  
      
     if [ $df1 -gt  90 ]||[ $df2  -gt  90 ]||[ $df3 -gt  90 ]||[ $df4 -gt  90 ]||[ $df5 -gt  90 ] ; then  
      
        echo "`date '+%Y年%m月%d日 %H:%M:%S'` 数据库服务器磁盘占用率过高！df -h取到的值是$df1,$df2,$df3,$df4,$df5,参考值是90，若其中一个或一个以上大于参考值，请及时处理！" >> ./newreport.txt  
      
    else  
      
        echo "磁盘占用率正常！"  
      
    fi  
      
    #*********************磁盘IO性能巡检***************  
    iostat -x 2 5 >>iostat.txt  
      
    scvtm1=" `cat  iostat.txt  | awk '{print $11}' | sed -n 16p | sed 's/%//g' `"  
      
    scvtm2="` cat  iostat.txt  | awk '{print $11}' | sed -n 17p | sed 's/%//g'`"  
      
    scvtm3="` cat  iostat.txt  | awk '{print $11}' | sed -n 18p | sed 's/%//g'`"  
      
    scvtm4="` cat  iostat.txt  | awk '{print $11}' | sed -n 19p | sed 's/%//g'`"  
      
    scvtm13="` cat  iostat.txt  | awk '{print $11}' | sed -n 25p | sed 's/%//g'`"  
      
    scvtm6=" `cat  iostat.txt  | awk '{print $11}' | sed -n 26p | sed 's/%//g' `"  
      
    scvtm7="` cat  iostat.txt  | awk '{print $11}' | sed -n 27p | sed 's/%//g'`"  
      
    scvtm8="` cat  iostat.txt  | awk '{print $11}' | sed -n 28p | sed 's/%//g'`"  
      
    scvtm9="` cat  iostat.txt  | awk '{print $11}' | sed -n 34p | sed 's/%//g'`"  
      
    scvtm10="` cat  iostat.txt  | awk '{print $11}' | sed -n 35p | sed 's/%//g'`"  
      
    scvtm11="` cat  iostat.txt  | awk '{print $11}' | sed -n 36p | sed 's/%//g'`"  
      
    scvtm12="` cat  iostat.txt  | awk '{print $11}' | sed -n 37p | sed 's/%//g'`"  
      
      
      
    util1="`cat  iostat.txt  | awk '{print $12}' | sed -n 16p | sed 's/%//g'`"  
      
    util2="` cat  iostat.txt  | awk '{print $12}' | sed -n 17p | sed 's/%//g'`"  
      
    util3="` cat  iostat.txt  | awk '{print $12}' | sed -n 18p | sed 's/%//g'`"  
      
    util4="` cat  iostat.txt  | awk '{print $12}' | sed -n 19p | sed 's/%//g'`"  
      
    util5="` cat  iostat.txt  | awk '{print $12}' | sed -n 25p | sed 's/%//g'`"  
      
    util6=" `cat  iostat.txt  | awk '{print $12}' | sed -n 26p | sed 's/%//g' `"  
      
    util7="` cat  iostat.txt  | awk '{print $12}' | sed -n 27p | sed 's/%//g'`"  
      
    util8="` cat  iostat.txt  | awk '{print $12}' | sed -n 28p | sed 's/%//g'`"  
      
    util9="` cat  iostat.txt  | awk '{print $12}' | sed -n 34p | sed 's/%//g'`"  
      
    util10="` cat  iostat.txt  | awk '{print $12}' | sed -n 35p | sed 's/%//g'`"  
      
    util11="` cat  iostat.txt  | awk '{print $12}' | sed -n 36p | sed 's/%//g'`"  
      
    util12="` cat  iostat.txt  | awk '{print $12}' | sed -n 37p | sed 's/%//g'`"  
      
    #***********1/2/3/4****************  
      
    maxa=`echo "$scvtm1 $scvtm2 $scvtm3 $scvtm4" | awk '{for(i=1;i<=NF;i++)$i>a?a=$i:a}END{print a}'`  
      
    #*************13/6/7/8/**************  
      
    maxb=`echo "$scvtm13 $scvtm6 $scvtm7 $scvtm8" | awk '{for(i=1;i<=NF;i++)$i>a?a=$i:a}END{print a}'`  
      
    #*************************9/10/11/12******************  
      
    maxc=`echo "$scvtm9 $scvtm10 $scvtm11 $scvtm12" | awk '{for(i=1;i<=NF;i++)$i>a?a=$i:a}END{print a}'`  
      
    #********************util1/2/3/4**********************  
      
    maxd=`echo "$util1 $util2 $util3 $util4" | awk '{for(i=1;i<=NF;i++)$i>a?a=$i:a}END{print a}'`  
      
      
    #**********************util5/6/7/8*******************  
      
    maxe=`echo "$util5 $util6 $util7 $util8" | awk '{for(i=1;i<=NF;i++)$i>a?a=$i:a}END{print a}'`  
      
    #***********************util9/10/11/12***************  
      
    maxf=`echo "$util9 $util10 $util11 $util12" | awk '{for(i=1;i<=NF;i++)$i>a?a=$i:a}END{print a}'`  
      
    #******************做判断************************  
    m=${maxa:0:1}  
      
    n=${maxb:0:1}  
      
    h=${maxc:0:1}  
      
    k=${maxd:0:1}  
      
    l=${maxe:0:1}  
      
    o=${maxf:0:1}  
      
      
    if [  $m -ge 15 ]&&[ $k -ge 99 ]&&[ $k -lt 100 ]$$[  $n -ge 15 ]&&[ $l -ge  99 ]&&[ $l -lt 100 ]&&[  $h -ge 15]&&[ $o -ge 99 ]&&[ $o -lt 100 ]  
      
    then  
      
        echo "`date '+%Y年%m月%d日 %H:%M:%S'`  数据库服务器磁盘IO存在瓶颈，请及时处理！" >> ./newreport.txt  
      
    else  
      
       echo "磁盘IO正常！"  
      
    fi  
      
    rm -rf ./iostat.txt  
      
    #*********************************网络连通性检测**********************  
      
    network1=`ping -s 4096 -c 5  135.0.51.15 | awk '{print $6}' | sed -n 9p | sed 's/%//g' |sed 's/t//g'`  
      
    if [ $network1 -gt 0 ]  
      
    then   
      
       echo "`date '+%Y年%m月%d日 %H:%M:%S'` 数据库服务器到该目标IP之间的网络不稳定，ping取到的值是$network1,大于参考值是0，系统存在风险，请及时处理！"  >> ./newreport.txt  
      
    else   
      
       echo "网络连通性正常！"  
      
    fi  
      
    echo "`date '+%Y年%m月%d日 %H:%M:%S'` 数据库服务器硬件情况巡检结束！"

脚本三

转至：https://blog.51cto.com/xiaorenwutest/2135667

运维需要了解服务器的资源使用率可以通过脚本查看，多台可以通过配合ansible进行查看

#!/bin/bash

phy_cpu=$(cat /proc/cpuinfo | grep "physical id"|sort | uniq | wc -l)

logic_cpu_num=$(cat /proc/cpuinfo | grep "processor"| wc -l)

cpu_core_num=$(cat /proc/cpuinfo | grep "cores"|uniq|awk -F: '{print $2}')

cpu_freq=$(cat /proc/cpuinfo | grep MHz | uniq | awk -F: '{print $2}')

system_core=$(uname -r)

system_version=$(cat /etc/redhat-release)

system_hostname=$(hostname | awk '{print $1}')

systemc_envirement_variables=$(env | grep PATH)

mem_free=$(grep MemFree /proc/meminfo)

disk_usage=$(df -h)

system_uptime=$(uptime)

system_load=$(cat /proc/loadavg)

system_ip=$(ifconfig | grep "inet"|grep -v "127.0.0.1"|awk -F: '{print $1}'|awk 'NR==1{print}'| awk '{print $2}')                #自己改的

mem_info=$(/usr/sbin/dmidecode | grep -A 16 "Memory Device"|grep -E "Size|Locator"|grep -v Bank)

mem_total=$(grep MemTotal /proc/meminfo)

day01=$(date +%Y)

day02=$(date +%m)

day03=$(date +%d)



path=inspection.txt

echo -e " " > $path

echo -e $day01年$day02月$day03系统巡检报告  >> $path

echo -e 主机名："	"$system_hostname >> $path

echo -e 服务器IP: "	"$system_ip >> $path

echo -e 系统内核: "	"$system_core  >> $path

echo -e 操作系统版本："	"$system_version >> $path

echo -e 磁盘使用情况： "	""	" $disk_usage >> $path

echo -e CPU核数："	"$cpu_core_num >> $path

echo -e 物理CPU个数："	"$phy_cpu >> $path

echo -e 逻辑CPU个数："	"$logic_cpu_num >> $path

echo -e 系统环境变量："	"$systemc_envirement_variables >> $path

echo -e CPU的主频："	"$cpu_freq >> $path

echo -e 内存简要信息："	"$mem_info >> $path

echo -e 内存总大小："	"$mem_total >> $path

echo -e 内存空间： "	"$mem_free >> $path

echo -e 时间/系统运行时间/当前登陆用户/系统过去1分钟/5分钟/15分钟内平均负载/"	"$system_uptime >> $path

echo -e 1分钟/5分钟/15分钟平均负载/在采样时刻，运行任务的数目/系统活跃任务的个数/最大的pid值线程/ "	"$system_load >> $path

脚本四

转至：https://www.cnblogs.com/peter316/p/6287196.html

#!/bin/bash

#set -x
2012-02-25
#version: 2.0
export LC_ALL="en_US.UTF-8"
 
server_info(){
echo ====================================================
#echo ======Time======
#date
echo ======1 hostname======
/bin/hostname
echo ======2 IP MASK======
/sbin/ifconfig eth0|grep "inet addr:"|awk '{print $2,"/ "$4}'
echo ======3 Gateway======
cat /etc/sysconfig/network|grep GATEWAY|awk -F "=" '{print $2}'
echo ======4 Product Name======
dmidecode | grep -A10 "System Information$" |grep "Product Name:"|awk '{print $3,$4,$5}'
##echo ======Host SN======
##dmidecode | grep -A10 "System Information$" |grep "Serial Number:"|awk '{print "SN:",$3}'
echo ======5 CPU ======
cat /proc/cpuinfo|grep "name"|cut -d: -f2 |awk '{print "*"$1,$2,$3,$4}'|uniq -c
echo ======6 Physical memory number======
 dmidecode | grep -A 16 "Memory Device$" |grep Size:|grep -v "No Module Installed"|awk '{print "*" $2,$3}'|uniq -c
echo ======7 System version ======
cat /etc/issue | head -1
echo =========================================================
}
 
OS_info(){
echo ==========================================================
echo ======1 kernel version ======
uname -a
echo ======2 running day ======
/usr/bin/uptime |awk '{print $3,$4}'
echo ==========================================================
}
 
performance_info(){
echo ==========================================================
echo ======1 CPU used ======
top -n 1 |grep C[Pp][Uu] |grep id|awk '{print $5}'|awk -F "%" '{print $1}'
#cpu_total=$(cat /proc/stat | grep 'cpu ' | awk '{print $2+$3+$4+$5+$6+$7+$8}')
#cpu_idle=$(cat /proc/stat | grep 'cpu ' |awk '{print $5}')
#cpu_use=`expr 100-"$cpu_idle/$cpu_total*100"|bc -l`
#echo $cpu_total
#echo $cpu_idle
#echo $cpu_use
echo ======2 memory used ======
#free -m |grep Mem|awk '{print $2,$3}'
mem_total=$(free -m |grep Mem|awk '{print $2}')
mem_used=$(free -m |grep Mem|awk '{print $3}')
mem_rate=`expr $mem_used/$mem_total*100|bc -l`
echo $mem_rate
echo ======3 swap used ======
#free -m |grep Swap|awk '{print $2,$3}'
Swap_total=$(free -m |grep Swap|awk '{print $2}')
Swap_used=$(free -m |grep Swap|awk '{print $3}')
Swap_rate=`expr $Swap_used/$Swap_total*100|bc -l`
echo $Swap_rate
echo ======4 top pic ======
top -b -n 1|head -25
echo ==========================================================
}
 
sec_info(){
echo ======1 user load ======
w
echo ======2 file used ======
df -ah
echo ======3 demsg error======
dmesg |grep fail
dmesg |grep error
echo ======4 demsg error======
lastlog
}

system_hardware_config(){
echo ===========================disk====================================
df -H |awk "{OFS="	"}{ print $1,$2,$3,$4,$5,$6}"
echo ===========================free====================================
free |head -1 |awk "{OFS="	"} {print $1,$2,$6}"
free -m |awk "BEGIN{OFS="	"}{if (NR==2 ||NR==4 )print $2,$3,$7}"
}
 
server_info>>$(/bin/hostname)-`date +%F`
OS_info>>$(/bin/hostname)-`date +%F`
performance_info>>$(/bin/hostname)-`date +%F`
sec_info>>$(/bin/hostname)-`date +%F`

echo "run Ok"

######################这是脚本内容结束部分######################################

日常LINUX巡检命令：

hostname
uname -a
netstat -rn
ifconfig -a
cat /etc/sysconfig/hwconf
cat /proc/meminfo
cat /proc/cpuinfo
cat /proc/swaps
sfdisk -g
df –k
sfdisk –g
dmesg
more /var/log/boot.log
more /var/log/messages

以前写的linux服务器的日常巡检脚本：
 
1、需巡检的服务器上定时执行：

##############脚本开始############################

#!/bin/sh
echo "------------ daily check begin -----------------" >>dc1.txt
#cd /home/wjlcn/monitor/check
cd /home/wjlcn/monitor/check/
date=`date +%c`
filename=`hostname`_check_`date +%Y%m%d`.txt
echo "-----------sar -ru 10 3----------------" >>dc1.txt
sar -ru 10 3 |sed -n '21,25p' >>dc1.txt
echo "------------top -d 1 -n 1 -------------" >>dc1.txt
/usr/bin/top  -b -d 1 -n 1 |sed -n '1,10p' |awk '{print $9,$12}' >top1.txt
sed '1,7d' top1.txt >>dc1.txt

echo "------------free -m ----------------" >>dc1.txt
free -m >>dc1.txt
echo "--------------df -h ---------------" >>dc1.txt
df -h >>dc1.txt
echo "----------  tripwire --check ----------">> dc1.txt
/usr/sbin/tripwire --check|sed -n '10p;18p;33,37p' >>dc1.txt
echo $date >>$filename
cat dc1.txt >>$filename
echo $date >>$filename
echo "--------------- the end ---------------" >>$filename
rm dc1.txt top1.txt


 
2、定时上传至ftp服务器

#!/bin/sh
cd /home/itownet/monitor/check
LOFFILE=ftp.log
ftp -n >>$LOFFILE <<EOF
open IP
user user  password
binary
cd test/pcreport
put *.txt
bye
EOF


 ########################脚本结束###########################
这样就只需在ftp服务器上巡检所有的服务器即可

脚本五

转至：https://blog.51cto.com/thinkcoding/1769207

文件说明

该Shell脚本旨在针对大量Linux服务器的巡检提供一种相对自动化的解决方案。脚本组成有三部分：shellsh.sh、checksh.sh、file.txt；这三个文件需放在一个文件夹下以root权限执行，缺一不可。

脚本用法：

将要巡检的服务器的IP地址和对应的密码全部放入file.txt中保存，每行一个IP对应一个密码即可。然后用如下命令运行：

#./ shellsh.sh file.txt192.168.182.143 123456

其中file.txt可以更换文件名，192.168.182.143为你想保存巡检日志的到哪个服务器的服务器IP，123456为该服务器的密码。

运行结果：

运行完后会在192.168.182.143服务器的/tmp目录下升成一个目录，即：GatherLogDirectory这个目录下即存放的是被巡检的服务器的巡检日志，这些日志以被巡检的服务器的IP命名，形如：192.168.182.146.log。在被巡检的服务器上会升成两个目录即：CheckScript、 LocalServerLogDirectory；其中CheckScript中是checksh.sh脚本，LocalServerLogDirectory中存放的是checksh.sh在该服务器上运行后升成的日志。

测试结果：

我只在虚拟机上的三台Linux系统上测试过，分别是Ubuntu、RedHat、Kali。运行正常，平均巡检一个服务器花费3分钟。

shell脚本实现多台服务器自动巡检第1张

 脚本代码：

shellsh.sh:

#!/bin/bash
login_info=$1
gather_server_ip=$2
gather_server_password=$3
grep_ip=`ifconfig | grep '([[:digit:]]{1,3}.){3}[[:digit:]]{1,3}' --color=auto -o | sed -e '2,5d'`

GatherPath="/tmp/GatherLogDirectory"
CheckScriptPath="/tmp/CheckScript"


if [ $# -ne 3 ]; then
    echo -e "Parameters if fault!
"
    echo -e "Please using:$0 login_info gather_server_ip
"
    echo -e "For example: $0 IpAndPassword.txt $grep_ip
"
    exit;
fi

if [ ! -x "$GatherPath" ];then
    mkdir "$GatherPath"
    echo -e "The log's path is: $GatherPath"
fi



cat $login_info | while read line

do

    server_ip=`echo $line|awk '{print $1}'`
    server_password=`echo $line|awk '{print $2}'`
    login_server_command="ssh -o StrictHostKeyChecking=no root@$server_ip"
    scp_gather_server_checksh="scp checksh.sh root@$server_ip:$CheckScriptPath"

/usr/bin/expect<<EOF
        set timeout 20
        spawn $login_server_command
        expect {
                   "*yes/no" { send "yes
"; exp_continue }
                   "*password:" { send "$server_password
" }
               }
        expect "Permission denied, please try again." {exit}
        expect "#" { send "mkdir $CheckScriptPath
"}
        expect eof
        exit

EOF
    
/usr/bin/expect<<EOF
        set timeout 20
        spawn $scp_gather_server_checksh
        expect {
                   "*yes/no" { send "yes
"; exp_continue }
                   "*password:" { send "$server_password
" }
               }
        expect "Permission denied, please try again." {exit}
        expect "Connection refused" {exit}
        expect "100%"
        expect eof
        exit

EOF

    
/usr/bin/expect<<EOF
        set timeout 60
        spawn $login_server_command
        expect {
                   "*yes/no" { send "yes
"; exp_continue }
                   "*password:" { send "$server_password
" }
               }
        expect "Permission denied, please try again." {exit}
        expect "#" { send "cd $CheckScriptPath;./checksh.sh $gather_server_ip $gather_server_password
"}
        expect eof
        exit

EOF

done

checksh.sh

#!/bin/bash
########################################################################################
#Function:
#This script checks the system's information,disks's information,performance,etc...of the
#server
#
#Author:
#By Jack Wang
#
#Company:
#ShaanXi Great Wall Information Co.,Ltd.
########################################################################################

########################################################################################
#
#GatherServerIpAddress is the server's IP address that gather the checking log
#GatherServerPassword is the server's IP address that gather the checking log
#
########################################################################################
GatherServerIpAddress=$1
GatherServerPassword=$2

########################################################################################
#GetTheIpCommand is a command that you can get the IP address
########################################################################################
GetTheIpCommand=`ifconfig | grep '([[:digit:]]{1,3}.){3}[[:digit:]]{1,3}' --color=auto -o | sed -e '2,5d'`

########################################################################################
#LogName is a command that Your logs'name
########################################################################################
LogName=`ifconfig|grep '([[:digit:]]{1,3}.){3}[[:digit:]]{1,3}' --color=auto -o|sed -e '2,5d'``echo "-"``date +%Y%M%d`

########################################################################################
#
#GatherLogPath is a path that collecting log path
#LocalServerLogPath is local log path
#
########################################################################################
GatherServerLogPath="/tmp/GatherLogDirectory"
LocalServerLogPath="/tmp/LocalServerLogDirectory"


########################################################################################
#LinuxOsInformation is function that usege to collect OS's information
########################################################################################
LinuxOsInformation(){
Hostname=`hostname`
UnameA=`uname -a`
OsVersion=`cat /etc/issue | sed '2,4d'`
Uptime=`uptime|awk '{print $3}'|awk -F "," '{print $1}'`
ServerIp=`ifconfig|grep "inet"|sed '2,4d'|awk -F ":" '{print $2}'|awk '{print $1}'`
ServerNetMask=`ifconfig|grep "inet"|sed '2,4d'|awk -F ":" '{print $4}'|awk '{print $1}'`
ServerGateWay=`netstat -r|grep "default"|awk '{print $2}'`
SigleMemoryCapacity=`dmidecode|grep -P -A5 "Memorys+Device"|grep "Size"|grep -v "Range"|grep '[0-9]'|awk -F ":" '{print $2}'|sed 's/^[ 	]*//g'`
MaximumMemoryCapacity=`dmidecode -t 16|grep "Maximum Capacity"|awk -F ":" '{print $2}'|sed 's/^[ 	]*//g'`
NumberOfMemorySlots=`dmidecode -t 16|grep "Number Of Devices"|awk -F ":" '{print $2}'|sed 's/^[ 	]*//g'`
MemoryTotal=`cat /proc/meminfo|grep "MemTotal"|awk '{printf("MemTotal:%1.0fGB
",$2/1024/1024)}'|awk -F ":" '{print $2}'`
PhysicalMemoryNumber=`dmidecode|grep -A16 "Memory Device"|grep "Size:"|grep -v "No Module Installed"|grep -v "Range Size:"|wc -l`
ProductName=`dmidecode|grep -A10 "System Information"|grep "Product Name"|awk -F ":" '{print $2}'|sed 's/^[ 	]*//g'`
SystemCPUInfomation=`cat /proc/cpuinfo|grep "name"|cut  -d: -f2|awk '{print "*"$1,$2,$3,$4}'|uniq -c|sed 's/^[ 	]*//g'`

echo -e "Hostname|$Hostname
Unamea|$UnameA
OsVersion|$OsVersion
Uptime|$Uptime
ServerIp|$ServerIp
ServerNetMask|$ServerNetMask
ServerGateWay|$ServerGateWay
SigleMemoryCapacity|$SigleMemoryCapacity
MaximumMemoryCapacity|$MaximumMemoryCapacity
NumberOfMemorySlots|$NumberOfMemorySlots
MemoryTotal|$MemoryTotal
PhysicalMemoryNumber|$PhysicalMemoryNumber
ProductName|$ProductName
SystemCPUInformation|$SystemCPUInfomation"

}

PerformanceInfomation (){
CPUIdle=`top -d 2 -n 1 -b|grep C[Pp][Uu]|grep id|awk '{print $5}'|awk -F "%" '{print $1}'`
CPUloadAverage=`top -d 2 -n 1 -b|grep "load average:"|awk -F ":" '{print $5}'|sed 's/^[ 	]*//g'`
ProcessNumbers=`top -d 2 -n 1 -b|grep "Tasks"|awk -F "[: ,]" '{print $3}'`
Proce***unning=`top -d 2 -n 1 -b|grep "Tasks"|awk -F "[: ,]" '{print $8}'`
ProcessSleeping=`top -d 2 -n 1 -b|grep "Tasks"|awk -F "[: ,]" '{print $11}'`
ProcessStoping=`top -d 2 -n 1 -b|grep "Tasks"|awk -F "[: ,]" '{print $16}'`
ProcessZombie=`top -d 2 -n 1 -b|grep "Tasks"|awk -F "[: ,]" '{print $21}'`
UserSpaceCPU=`top -d 2 -n 1 -b|grep 'C[Pp][Uu]'|head -1|awk -F "[: ,%]" '{print $4}'`
SystemSpaceCPU=`top -d 2 -n 1 -b|grep 'C[Pp][Uu]'|head -1|awk -F "[: ,%]" '{print $8}'`
ChangePriorityCPU=`top -d 2 -n 1 -b|grep 'C[Pp][Uu]'|head -1|awk -F "[: ,%]" '{print $12}'`
WaitingCPU=`top -d 2 -n 1 -b|grep 'C[Pp][Uu]'|head -1|awk -F "[: ,%]" '{print $19}'`
HardwareIRQCPU=`top -d 2 -n 1 -b|grep 'C[Pp][Uu]'|head -1|awk -F "[: ,%]" '{print $23}'`
SoftwareIRQCPU=`top -d 2 -n 1 -b|grep 'C[Pp][Uu]'|head -1|awk -F "[: ,%]" '{print $27}'`
MemUsed=`top -d 2 -n 1 -b|grep "Mem"|awk -F "[: ,]" '{print $11}'|tr -d "a-zA-Z"|awk '{printf("%dM
",$1/1024)}'`
MemFreeP=`top -d 2 -n 1 -b|grep "Mem"|awk -F "[: ,]" '{print $16}'|tr -d "a-zA-Z"|awk '{printf("%dM
",$1/1024)}'`
MemBuffersP=` top -d 2 -n 1 -b|grep "Mem"|awk -F "[: ,]" '{print $22}'|tr -d "a-zA-Z"|awk '{printf("%dM
",$1/1024)}'`
CacheCachedP=`top -d 2 -n 1 -b|grep "Swap"|awk -F "[: ,]" '{print $24}'|tr -d "a-zA-Z"|awk '{printf("%dM
",$1/1024)}'`
CacheTotal=`top -d 2 -n 1 -b|grep "Swap"|awk -F "[: ,]" '{print $4}'|tr -d "a-zA-Z"|awk '{printf("%dM
",$1/1024)}'`
CacheUsed=`top -d 2 -n 1 -b|grep "Swap"|awk -F "[: ,]" '{print $14}'|tr -d "a-zA-Z"|awk '{printf("%dM
",$1/1024)}'`
CacheFree=`top -d 2 -n 1 -b|grep "Swap"|awk -F "[: ,]" '{print $18}'|tr -d "a-zA-Z"|awk '{printf("%dM
",$1/1024)}'`

echo -e "CPUIdle|$CPUIdle
CPUloadAverage|$CPUloadAverage
ProcessNumbers|$ProcessNumbers
Proce***unning|$Proce***unning
ProcessSleeping|$ProcessSleeping
ProcessStoping|$ProcessStoping
ProcessZombie|$ProcessZombie
UserSpaceCPU|$UserSpaceCPU
SystemSpaceCPU|$SystemSpaceCPU
ChangePriorityCPU|$ChangePriorityCPU
WaitingCPU|$WaitingCPU
HardwareIRQCPU|$HardwareIRQCPU
SoftwareIRQCPU|$SoftwareIRQCPU
MemUsed|$MemUsed
MemFreeP|$MemFreeP
MemBuffersP|$MemBuffersP
CacheCachedP|$CacheCachedP
CacheTotal|$CacheTotal
CacheUsed|$CacheUsed
CacheFree|$CacheFree
"
}

OprateSystemSec () {
echo '======================UserLogin======================'
w

echo '======================FileUsed======================='
df -ah

echo '======================dmesgError====================='
dmesg | grep error

echo '======================dmesgFail======================'
dmesg | grep Fail

echo '======================BootLog========================'
more /var/log/boot.log | grep -V "OK" | sed '1,6d'

echo '======================route -n======================='
route -n
echo '======================iptables -L===================='
iptables -L
echo '======================netstat -lntp=================='
netstat -lntp
echo '======================netstat -antp=================='
netstat -antp
echo '======================BootLog========================'
netstat -s
echo '======================netstat -s====================='
last
echo '======================du -sh /etc/==================='
du -sh /etc/
echo '======================du -sh /boot/=================='
du -sh /boot/
echo '======================du -sh /dev/==================='
du -sh /dev/
echo '======================df -h=========================='
df -h
echo '======================mount | column -t=============='
mount | column -t

}


TopAndVmstat(){
top -d 2 -n 1 -b
vmstat 1 10
}

CheckGatherLog(){

if [ -f "$LocalServerLogPath/$GetTheIpCommand.log" ];then
       rm -rf $LocalServerLogPath/$GetTheIpCommand.log
fi

if [ ! -x "$LocalServerLogPath" ];then
    mkdir "$LocalServerLogPath"
fi

if [ ! -f "$LocalServerLogPath/$GetTheIpCommand.log" ];then
    touch $LocalServerLogPath/$GetTheIpCommand.log
    LinuxOsInformation>>$LocalServerLogPath/$GetTheIpCommand.log
    PerformanceInfomation>>$LocalServerLogPath/$GetTheIpCommand.log
    OprateSystemSec>>$LocalServerLogPath/$GetTheIpCommand.log
    TopAndVmstat>>$LocalServerLogPath/$GetTheIpCommand.log
fi
}

CheckGatherLog

SCP_LOG_TO_GATHER_SERVER="scp $LocalServerLogPath/$GetTheIpCommand.log root@$GatherServerIpAddress:$GatherServerLogPath"

/usr/bin/expect<<EOF
        set timeout 50
        spawn $SCP_LOG_TO_GATHER_SERVER
        expect {
                "*yes/no)?" 
                 { 
                     send "yes
"
                     "*password:*" {send "GatherServerPassword
"}
                 } 
                "*password:"         
                 {
                     send "$GatherServerPassword
"
                 }
               }
        expect "*password:"  { send "$GatherServerPassword
" }
        expect "100%"
        expect eof

EOF

file.txt内容形式

192.168.182.143  123456
192.168.182.129  123456
192.168.182.146  123456

注：192.168.182.143是被巡检的服务器ip，123456是被巡检的服务器密码。

声明：此脚本将巡检结果用awk和sed以及grep进行了过滤，以便格式化显示和excel进行处理。由于水平有限，如果有大神认为还有更好的解决方案或者这个脚本还有改进的地方，请指出。我们大家共同学习，共同进步。

个人QQ：1299039410

附件：http://down.51cto.com/data/2367652
 
脚本六
转至：https://www.jb51.net/article/112586.htm
#!/bin/bash

check_process(){
tolprocess=`ps auxf|grep DisplayMa[nager]|wc -l`

#if [ "$tolprocess" -lt "1" ];then
if [ "$tolprocess" -ge "1" ];then
    echo 'process ok'
else
    echo 'fail'
fi
}


check_log(){
if [ -e /etc/syslog-ng/syslog-ng.conf ];then
    conlog=`cat '/etc/syslog-ng/syslog-ng.conf'|grep "10.70.72.253"|wc -l`
    if [ "$conlog" -ge "1" ];then
        echo 'syslog-ng ok'
    fi
elif [ -e /etc/syslog.conf ];then
    conlog=`cat '/etc/syslog.conf'|grep "10.70.72.253"|wc -l`
    if [ "$conlog" -ge "1" ];then
           echo 'syslog ok'
    fi
else
    echo 'log not find or error'
fi
}


check_cpuidle(){
mincpu=`sar -u 2 10|grep all|awk '{print $NF}'|sort -nr|tail -1`

if [ $(echo "${mincpu} < 20" | bc) = 1 ];then
#if [ "$mincpu" -le "20" ];then
    echo 'cpu idle is less than 20% ,please check'
else
    echo 'cpu idle is more than 20%, it is ok '
fi

}


check_mem(){
vmstat 2 10 
}


check_disk(){
chkdsk=`fdisk -l|egrep 'failed|unsynced|unavailable'|wc -l`
if [ "$chkdsk" -ge "1" ];then
    echo 'fdisk check ok '
else
    echo 'fdisk check find error,please check your disk '
fi
}


check_io(){
util=`sar -d 2 10|egrep -v 'x86|^$|await'|awk '{print $NF}'|sort -nr|tail -1`
await=`sar -d 2 10|egrep -v 'x86|^$|await'|awk '{print $(NF-2)}'|sort -nr|tail -1`

if [ $(echo "${util} < 80" | bc) = 1 ] && [ $(echo "${await} < 100" | bc) = 1 ] ;then
    echo 'disk io check is fine'
else
    echo 'disk io use too high '
fi

}


check_swap(){

tolswap=`cat /proc/meminfo|grep SwapTotal|awk '{print $2}'`
#awk '/SwapTotal/{total=$2}/SwapFree/{free=$2}END{print (total-free)/1024}' /proc/meminfo 
useswap=`awk '/SwapTotal/{total=$2}/SwapFree/{free=$2}END{print (total-free)}' /proc/meminfo `
util=`awk 'BEGIN{printf "%.1f
",'$useswap'/'$tolswap'}'`


if [ $(echo "${util} < 0.3" | bc) = 1 ] || [ $(echo "${useswap} < 1024" | bc) = 1 ] ;then
    echo 'swap use is ok '
else
    echo "useswap: $useswap kb, swap util is $util"
fi

}


check_dmesg(){
chkdm=`dmesg |egrep 'scsi reset|file system full'|wc -l`
if [ "$chkdm" -ge "1" ];then
    echo 'dmesg test ok '
else
    echo 'dmesg check find error '
fi
}

check_boot(){
chkdm=`cat /var/log/boot.msg|egrep 'scsi reset|file system full'|wc -l`
if [ "$chkdm" -ge "1" ];then
    echo 'boot check fine '
else
    echo 'boot check find error '
fi
}

check_inode(){
maxinode=`df -i|awk '{print $5}'|egrep -v 'IUse|-' |sed 's/%//g'|sort -nr|head -1`
if [ $(echo "${maxinode} < 80" | bc) = 1 ];then
    echo 'inode check ok '
else
    echo 'inode used more than 80% '
fi
}

check_df(){
dfuse=`df -HT|awk '{print $6}'|grep -v Use|sed 's/%//g'|sort -nr|head -1`
if [ $(echo "${dfuse} < 80" | bc) = 1 ];then
    echo 'disk used is less than 80% ,it is ok !'
elif [ $(echo "${dfuse} > 80" | bc) = 1 ] && [ $(echo "${dfuse} < 90" | bc) = 1 ];then
    echo 'warning , disk used more than 80% and less than 90% '
else
    echo ' Critical, disk used more than 90% '
fi
}


echo '################### check process ###################'
check_process
echo '################### check syslog ####################'
check_log
echo '################### check cpuidle ###################'
check_cpuidle
echo '################### echo memory stat ################'
check_mem
echo '################### check fdisk #####################'
check_disk
echo '################### check io used ###################'
check_io
echo '################### check swap used #################'
check_swap
echo '################### check dmesg #####################'
check_dmesg
echo '################### check inode #####################'
check_inode
echo '################### check disk used #################'
check_df

保存为/system/check_linux.sh

 

标签：#服务器#$#echo#print#- | 浏览：169 | 发布日期：

免责声明：文章转载自《shell脚本实现多台服务器自动巡检》仅用于学习参考。如对内容有疑问，请及时联系本站处理。

上篇学习通刷课源代码，教你动手自己刷课【无门槛】在word2019中使用latex下篇

宿迁高防，2C2G15M，22元/月；香港BGP，2C5G5M，25元/月 雨云优惠码：MjYwNzM=

相关文章

shell脚本(3)-格式化输出

一个程序需要有0个或以上的输入，一个或更多输出 一、echo语法 1、功能：将内容输出到默认显示设备。 echo命令功能在显示器上显示一段文字，一般提到提示的作用 2、语法：echo[-ne][字符串] 补充说明：echo会将输入的字符串送往标准输出，输出的字符串以空白字符隔开，并在最后加上换行号。 命令选项： -n：不在最后自动换行： [root@loc...

四、Haproxy的4层及7层IP透传

IP透传是web服务器中需要记录客户端的真实IP地址，用于做访问统计、安全防护、行为分析、区域排行等场景。 四层IP透传配置   haproxy 配置： listen web_prot bind 192.168.32.204:80 mode tcp balance roundrobin server web1 10.0.0.201 send-proxy...

粘包问题及解决方案

一、粘包问题问题1: 无法确认对方发送过来数据的大小。 ‘client.py' import socket client = socket.socket() client.connect( ('127.0.0.1', 9000)) while True: cmd = input('客户端输入的内容: ') client.send(cmd.encode(...

Linux下shell通用脚本启动jar（微服务）

Linux下shell通用脚本启动jar（微服务） vim app_jar.sh #!/bin/bash #source /etc/profile # Auth：https://www.cnblogs.com/liucx/ # Please change these parameters according to your real env. # set...

空连接ipc$入侵

使用命令 net use url=file://\IPipc$\IPipc$ "" /user:"" 就可以简单地和目标建立一个空连接（需要目标开放ipc$）。 1.基本简介 网上关于 ipc$ 入侵的文章可谓多如牛毛，攻击步骤甚至已经成了固化的模式，因此也没人愿意再把这已经成为定式的东西拿出来摆弄。不过话虽这样说，我认为这些文章讲解的并不详细，一些内容甚...

利用7z实现一键解压

目的： 实现双击zip，7z，rar等文件时自动解压，解压完毕后自动打开文件夹。 工具： [本文末尾附有所有工具的下载地址] 7z.exe types 步骤： 新建"7z-自动解压"文件夹 把7z.exe放进去 (7z.exe是7zip的命令版本) 保存以下代码为7z-AutoUnpack.bat 7z-AutoUnpack.bat @echo o...

最新文章

随机推荐

思享工具箱导航