摘要：
1、 MACD底部偏离可靠的买入点1.底部偏离后的第一个金叉是最佳买入点2.先决条件：第一个MACD应该有足够的增长动力，这样成功率高。2.MACD底部偏离失败买入点1.MACD标准差公式的源代码如下：DIFF:EMA-EMA；DEA：EMA；MACD:2*，颜色棒，LINETHICK2；下金叉：=CROSSANDDIFF˂-0.1；粘线，颜色为黄色；JCCOUNT：=计数；次要金叉：=CROSSANDDEACLOSEANDDIFF˃REFANDCROSS；STICKLINE，颜色00ff00；背面：DRAWLINE，COLORED，LINETHICK4；DRAWTEXT，COLORFF00FF；A2:=酒吧餐；顶部偏差：=REFDIFFANDCROSS；2.MACD标准选股公式：DIFF:=EMA-EMA；DEA：=EMA；MACD:=2*；A1:=酒吧酒吧；底部偏差：REF˃CLOSEANDDIFF˃REFANDCROSS；3.MACD标准选股公式DIF:=EMA-EMA；DEA：=EMA；MACD0:=*2；MJ:=MACD0；S05：=总和；QST：=酒吧酒吧+1；QXT：=BARSLAST+1；S5:=IF/10；ST:=如果；RS5:=参考；BC：如果；
一、MACD底背离可靠买点
1、底背离产生之后的第一个金叉为最佳买点（macd面积背离）
2、前提条件：第一个macd涨幅动能要充足，这样成功率高
二、MACD底背离失败买点
1、MACD标准背驰公式源码如下：
DIFF:EMA(CLOSE,12)-EMA(CLOSE,26); DEA:EMA(DIFF,9); MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK2; 低位金叉:=CROSS(DIFF,DEA) AND DIFF<-0.1; STICKLINE(低位金叉,0,0.08,6,0),COLORYELLOW; JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0)); 二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1; STICKLINE(二次金叉,0,0.06,6,0),COLORFF00FF; DRAWICON(二次金叉,DEA*0.9,1) ; DRAWTEXT(二次金叉,0.25,' 二次金叉'),COLORYELLOW; A1:=BARSLAST(REF(CROSS(DIFF,DEA),1)); 底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA); STICKLINE(底背离,0,0.03,6,0),COLOR00FF00; 底背:DRAWLINE(A1=0,DEA,底背离,DEA,0),COLORRED,LINETHICK4; DRAWTEXT(底背离,0.12,' 底背离'),COLORFF00FF; A2:=BARSLAST(REF(CROSS(DEA,DIFF),1)); 顶背离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
2、MACD标准背驰选股公式：
DIFF:=EMA(CLOSE,12)-EMA(CLOSE,26); DEA:=EMA(DIFF,9); MACD:=2*(DIFF-DEA); A1:=BARSLAST(REF(CROSS(DIFF,DEA),1)); 底背离:REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
3、MACD标准背驰选股公式
DIF:=EMA(CLOSE,12)-EMA(CLOSE,26); DEA:=EMA(DIF,9); MACD0:=(DIF-DEA)*2; MJ:=MACD0; S05:=SUM(MJ,0); QST:=BARSLAST(MJ<0 AND REF(MJ,1)>0)+1; QXT:=BARSLAST(MJ>0 AND REF(MJ,1)<0)+1; S5:=IF(MJ>0,S05-REF(S05,BARSLAST(MJ<0)),S05-REF(S05,BARSLAST(MJ>0)))/10; ST:=IF(MJ>0,REF(QST,QXT)+QXT,REF(QXT,QST)+QST); RS5:=REF(S5,ST); BC:IF(MJ>0 AND S5<RS5,0,IF(MJ<0 AND S5>RS5 AND DEA<0,1,0));